2.7.0

User avatar
DK1WP
Posts: 5
Joined: Thu Apr 25, 2019 4:12 pm
Location: Germany
Contact:

Re: 2.7.0

Postby DK1WP » Sun Jun 28, 2020 2:06 pm

DG9FDA wrote:Here 100D, Thetis v2.7.0 (3/1/20) MW0LGE (a3), Metis_Angelia_Protocol_2_v12.1_pre4. The Drive slider position is not stored wether in the TX profile (what I like to have) nor in the Database. When I shut down Thetis and start again I have Drive slider position 100 again. This is not very funny because I like to use my SPE1K-FA and need only 20 Watts for legal limit. Any information for me?

The second problem I have is that under "General - Ant/Filters - HPF/LPF" the HPF table is missing. There is no information about this problem in the forum up to now...

Thanks, Georg, DG9FDA



Hello Georg,

i guess that your DJ Control MP3 e2 is set to 100% with the gain control. With the start of Thetis this position is taken over. Turn the knob down and it should work.
73 Marcus

ANAN 200D - Firmware 1.9_pre4 - Thetis 2.7.0. a3 - LinHPSDR
DG9FDA
Posts: 7
Joined: Mon Apr 10, 2017 7:58 am
Location: JO40HK

Re: 2.7.0

Postby DG9FDA » Sun Jun 28, 2020 2:20 pm

Hello Marcus,

this is the trick! Thank you for this hint! Now I am waiting for a reply to my second problem with the Filter tab...

73 de Georg, DG9FDA
Anan 100D, Thetis v2.7.0 (3/1/20) MW0LGE (a3), Protocol_2_v12.1_pre4
User avatar
FM5GB
Posts: 64
Joined: Sun Apr 09, 2017 10:03 pm

Re: 2.7.0

Postby FM5GB » Mon Jun 29, 2020 12:49 am

Hi Georg,
remember to utilize DDUtil v 3.2.5 and connect your radio to your computer & the amp to your computer (as explained in the amp manual) so you can automatically control your drive level in Thetis by band. So you never overdrive your 1K-FA.
I've been utilizing this procedure since I got my Flex 5000A almost 10 years ago. DDUtil is to be downloaded on k5fr.com. It works for legacy Flex radios and has always been good for Anan radios operated thru PowerSDRmrx or Thetis. Later versions after 3.2.5 do not work being only suitable for Flex signature radios (6000 series).

Maybe you already use this configuration. If not I could give you a hand to fix it if needed.

73s Phil FM5GB
DG9FDA
Posts: 7
Joined: Mon Apr 10, 2017 7:58 am
Location: JO40HK

Re: 2.7.0

Postby DG9FDA » Tue Jun 30, 2020 7:56 am

Thank you Phil, I will try when I find the time...

73 de Georg, DG9FDA
Anan 100D, Thetis v2.7.0 (3/1/20) MW0LGE (a3), Protocol_2_v12.1_pre4

Return to “Thetis”