Anan 7000 DLE MKII & WSTJ-X

qst
Posts: 90
Joined: Fri Jul 28, 2017 9:44 pm

Anan 7000 DLE MKII & WSTJ-X

Postby qst » Fri Nov 08, 2019 7:08 pm

Hi to all,
I have a problem with my Anan configuration with WSTJ-X program. Please help.
Slawomir
User avatar
Tony EI7BMB
Posts: 651
Joined: Sun Apr 09, 2017 2:31 pm
Location: Dublin
Contact:

Re: Anan 7000 DLE MKII & WSTJ-X

Postby Tony EI7BMB » Fri Nov 08, 2019 7:17 pm

Hard to help without knowing what the problem is , can you give some more information ?
User avatar
w-u-2-o
Posts: 5540
Joined: Fri Mar 10, 2017 1:47 pm

Re: Anan 7000 DLE MKII & WSTJ-X

Postby w-u-2-o » Fri Nov 08, 2019 7:36 pm

Moving this to the digital mode subforum where it belongs.

Give us more info and we'll try to help.
NC3Z
Posts: 464
Joined: Sun Oct 29, 2017 8:57 pm
Location: Merritt, NC

Re: Anan 7000 DLE MKII & WSTJ-X

Postby NC3Z » Fri Nov 08, 2019 7:38 pm

Reboot :lol:
Gary NC3Z
qst
Posts: 90
Joined: Fri Jul 28, 2017 9:44 pm

Re: Anan 7000 DLE MKII & WSTJ-X

Postby qst » Sat Nov 09, 2019 10:57 am

Hi,I installed 4 Virtual Audio Cable-Muzychenko. In the Power SDR - audio-VAC setup I choose the MME driver. The input is only Line 3 and line 4 (VAC). The output is VAC 1, VAC 3 and VAC 4 (VAC). This is probably not correct. Which ports should I choose in input and ouput VAC1 audio setup in HPSDR?
Slawomir
User avatar
w-u-2-o
Posts: 5540
Joined: Fri Mar 10, 2017 1:47 pm

Re: Anan 7000 DLE MKII & WSTJ-X

Postby w-u-2-o » Sun Nov 10, 2019 3:47 pm

Slawomir,

Please post some screen shots of your WSJT-X audio setup, PowerSDR VAC setup, and Muzy VAC setup screens. You can use the "Attachments" tab below the main editing window here to do that. Then we'll have a better idea of what's going on.

Thanks,

Scott
qst
Posts: 90
Joined: Fri Jul 28, 2017 9:44 pm

Re: Anan 7000 DLE MKII & WSTJ-X

Postby qst » Mon Nov 11, 2019 9:41 am

Hi Scott,
thank you for your answer. I have partially solved the problem. Audio drivers after the WIn 10 update did not work properly. I can already see 4 virtual cables in the HPSDR setup. But only you can see them when the MME driver is enabled. When I turn on the Windows WDM-KS driver, there is no VAC in the input and output window. Maybe this is a problem of the Muse VAC program. WDM-KS is also in the older version. I send screenshots.
73's
Slawomir
Attachments
VAC2.jpg
VAC2.jpg (816.8 KiB) Viewed 10505 times
VAC1.jpg
VAC1.jpg (989.02 KiB) Viewed 10505 times
My VAC Config.PNG
My VAC Config.PNG (194.43 KiB) Viewed 10505 times
User avatar
w-u-2-o
Posts: 5540
Joined: Fri Mar 10, 2017 1:47 pm

Re: Anan 7000 DLE MKII & WSTJ-X

Postby w-u-2-o » Mon Nov 11, 2019 12:13 pm

Windows updates are known to damage noon-Windows sound drivers.

Uninstall VAC. Reboot. Reinstall VAC. Reboot. Then try setting it all up again.
qst
Posts: 90
Joined: Fri Jul 28, 2017 9:44 pm

Re: Anan 7000 DLE MKII & WSTJ-X

Postby qst » Mon Nov 11, 2019 3:39 pm

Hi Scott,problem solved. By default, the new version of VAC Capture port and Render port is turned on "auto" I changed to Wave PCi and now everything works ok. In the Window WDM-KS driver in the input and output tab virtual cables are visible. Everything works ok.
Thank you for the advice. Best wishes.
Slawomir
Attachments
VAC-3PNG.PNG
VAC-3PNG.PNG (38.76 KiB) Viewed 10478 times
qst
Posts: 90
Joined: Fri Jul 28, 2017 9:44 pm

Re: Anan 7000 DLE MKII & WSTJ-X

Postby qst » Mon Nov 11, 2019 6:58 pm

Hi,
after VAC configuration I turned on WSJT-X. The Wide Graph shows working stations, the reception level in the Ban Acitivity window is about 70% and there are no working stations. I have enabled CQ and correspondence can see my sign. A few people called me but I didn't see them in the window. I don't know what I did wrong in HPSDR or WSJT-X configuration. What can I check and change to correctly receive stations and work on FT8?
Slawomir
Attachments
PrzechwytywanieDLO-WSJT-X.PNG
PrzechwytywanieDLO-WSJT-X.PNG (2.45 MiB) Viewed 10458 times
NC3Z
Posts: 464
Joined: Sun Oct 29, 2017 8:57 pm
Location: Merritt, NC

Re: Anan 7000 DLE MKII & WSTJ-X

Postby NC3Z » Mon Nov 11, 2019 7:03 pm

Are you using anything to ensure your PC clock is accurate?
Gary NC3Z
NC3Z
Posts: 464
Joined: Sun Oct 29, 2017 8:57 pm
Location: Merritt, NC

Re: Anan 7000 DLE MKII & WSTJ-X

Postby NC3Z » Mon Nov 11, 2019 7:04 pm

Your input level to WSJT is also very, very high.
Gary NC3Z
qst
Posts: 90
Joined: Fri Jul 28, 2017 9:44 pm

Re: Anan 7000 DLE MKII & WSTJ-X

Postby qst » Tue Nov 12, 2019 5:47 am

Hi, I solved the problem. I had to change Driver WDM-KS to MME and everything started to work properly. I don't know why WDM-KS doesn't work. Various configurations are shown on Youtube. Only MME works for me and I will leave it that way.
Greetings to all.
Slawomir

Return to “Digital Mode, Rig Control & Logging Software”