Hi to all,
I have a problem with my Anan configuration with WSTJ-X program. Please help.
Slawomir
Anan 7000 DLE MKII & WSTJ-X
- Tony EI7BMB
- Posts: 653
- Joined: Sun Apr 09, 2017 2:31 pm
- Location: Dublin
- Contact:
Re: Anan 7000 DLE MKII & WSTJ-X
Hard to help without knowing what the problem is , can you give some more information ?
Re: Anan 7000 DLE MKII & WSTJ-X
Moving this to the digital mode subforum where it belongs.
Give us more info and we'll try to help.
Give us more info and we'll try to help.
Re: Anan 7000 DLE MKII & WSTJ-X
Hi,I installed 4 Virtual Audio Cable-Muzychenko. In the Power SDR - audio-VAC setup I choose the MME driver. The input is only Line 3 and line 4 (VAC). The output is VAC 1, VAC 3 and VAC 4 (VAC). This is probably not correct. Which ports should I choose in input and ouput VAC1 audio setup in HPSDR?
Slawomir
Slawomir
Re: Anan 7000 DLE MKII & WSTJ-X
Slawomir,
Please post some screen shots of your WSJT-X audio setup, PowerSDR VAC setup, and Muzy VAC setup screens. You can use the "Attachments" tab below the main editing window here to do that. Then we'll have a better idea of what's going on.
Thanks,
Scott
Please post some screen shots of your WSJT-X audio setup, PowerSDR VAC setup, and Muzy VAC setup screens. You can use the "Attachments" tab below the main editing window here to do that. Then we'll have a better idea of what's going on.
Thanks,
Scott
Re: Anan 7000 DLE MKII & WSTJ-X
Hi Scott,
thank you for your answer. I have partially solved the problem. Audio drivers after the WIn 10 update did not work properly. I can already see 4 virtual cables in the HPSDR setup. But only you can see them when the MME driver is enabled. When I turn on the Windows WDM-KS driver, there is no VAC in the input and output window. Maybe this is a problem of the Muse VAC program. WDM-KS is also in the older version. I send screenshots.
73's
Slawomir
thank you for your answer. I have partially solved the problem. Audio drivers after the WIn 10 update did not work properly. I can already see 4 virtual cables in the HPSDR setup. But only you can see them when the MME driver is enabled. When I turn on the Windows WDM-KS driver, there is no VAC in the input and output window. Maybe this is a problem of the Muse VAC program. WDM-KS is also in the older version. I send screenshots.
73's
Slawomir
- Attachments
-
- VAC2.jpg (816.8 KiB) Viewed 10720 times
-
- VAC1.jpg (989.02 KiB) Viewed 10720 times
-
- My VAC Config.PNG (194.43 KiB) Viewed 10720 times
Re: Anan 7000 DLE MKII & WSTJ-X
Windows updates are known to damage noon-Windows sound drivers.
Uninstall VAC. Reboot. Reinstall VAC. Reboot. Then try setting it all up again.
Uninstall VAC. Reboot. Reinstall VAC. Reboot. Then try setting it all up again.
Re: Anan 7000 DLE MKII & WSTJ-X
Hi Scott,problem solved. By default, the new version of VAC Capture port and Render port is turned on "auto" I changed to Wave PCi and now everything works ok. In the Window WDM-KS driver in the input and output tab virtual cables are visible. Everything works ok.
Thank you for the advice. Best wishes.
Slawomir
Thank you for the advice. Best wishes.
Slawomir
- Attachments
-
- VAC-3PNG.PNG (38.76 KiB) Viewed 10693 times
Re: Anan 7000 DLE MKII & WSTJ-X
Hi,
after VAC configuration I turned on WSJT-X. The Wide Graph shows working stations, the reception level in the Ban Acitivity window is about 70% and there are no working stations. I have enabled CQ and correspondence can see my sign. A few people called me but I didn't see them in the window. I don't know what I did wrong in HPSDR or WSJT-X configuration. What can I check and change to correctly receive stations and work on FT8?
Slawomir
after VAC configuration I turned on WSJT-X. The Wide Graph shows working stations, the reception level in the Ban Acitivity window is about 70% and there are no working stations. I have enabled CQ and correspondence can see my sign. A few people called me but I didn't see them in the window. I don't know what I did wrong in HPSDR or WSJT-X configuration. What can I check and change to correctly receive stations and work on FT8?
Slawomir
- Attachments
-
- PrzechwytywanieDLO-WSJT-X.PNG (2.45 MiB) Viewed 10673 times
Re: Anan 7000 DLE MKII & WSTJ-X
Are you using anything to ensure your PC clock is accurate?
Gary NC3Z
Re: Anan 7000 DLE MKII & WSTJ-X
Hi, I solved the problem. I had to change Driver WDM-KS to MME and everything started to work properly. I don't know why WDM-KS doesn't work. Various configurations are shown on Youtube. Only MME works for me and I will leave it that way.
Greetings to all.
Slawomir
Greetings to all.
Slawomir