HTTP Server?

[NC3Z]

Under CAT Controls > User Interface Is this working??

[w-u-2-o]

It has some very rudimentary and fragmented functionality and is not by any means a finished capability. I've tried it and it shows great promise for the future. I have no idea who the dev's are/were on this, but perhaps we should start sending them free pizza and beer

[NC3Z]

I have tried enabling it but no joy, even ports scanning shows no port responding. No big deal, just wondering.

[w-u-2-o]

Gary: open the port as http://127.0.0.1:80 (or whatever your port number is) on the same machine. If memory serves, you have to enable it, then restart Thetis.

[NC3Z]

I already tried all those tricks with no joy. Network port scanner can't find anything either.
But no issue, just was curious. Other issues need to be addressed.

[Jay_N2MGA]

I know this thread is old but I was able to get the http server working by turning off Thetis, selecting the "On: Advanced" check box shown on the Cat Control/User Interface setup screen, turning on Thetis then browsing to the local IP 127.0.0.1:8081 port # address. Selecting "On: Basic" did not work for me.

cheers!
jay
n2mga

[NC3Z]

Thanks for the hint, indeed it worked on Advanced, and not on Basic.