I have a PiHPSDR controlling my Anan 100D, I have just installed the latest version 2.0.8 rc1 and it has solved the issues when using Transverter.
But my VFO know tunes the opposite way to what it did before, I remember I changed this with the previous version by changing the GPIO allocations, but these all seem to have changed in the latest version and the information to swop the direction , no longer seems to apply.
Can anyone advise on how I can change the tuning direction.
Many thanks
Anthony G7LRQ/G7L
Changing Encoder directions?
-
- Posts: 17
- Joined: Wed Aug 11, 2021 8:05 pm
Re: Changing Encoder directions?
Hi Anthony,
Try changing the profile in the initial screen - the one you see before a radio is actually discovered.
73 de va7qi, ....Erik.
Try changing the profile in the initial screen - the one you see before a radio is actually discovered.
73 de va7qi, ....Erik.
Re: Changing Encoder directions?
BTW do you have a link to the upgrade process? I remember seeing it somewhere, but have lost the link.
I upgraded yesterday and lost audio on Ch#1. Ch#2 works fine, so I ran in split mode this evening, I did not see any other changes, so perhaps I did something wrong.
73 de va7qi, ....Erik.
I upgraded yesterday and lost audio on Ch#1. Ch#2 works fine, so I ran in split mode this evening, I did not see any other changes, so perhaps I did something wrong.
73 de va7qi, ....Erik.
-
- Posts: 17
- Joined: Wed Aug 11, 2021 8:05 pm
Re: Changing Encoder directions?
Erik Thanks for replying.
I did try changing the settings in that part but that part seems to have all changed from the previous documented version.
The Install/update instruction are here https://github.com/g0orx/pihpsdr/blob/m ... nstall.pdf
I did try changing the settings in that part but that part seems to have all changed from the previous documented version.
The Install/update instruction are here https://github.com/g0orx/pihpsdr/blob/m ... nstall.pdf
Re: Changing Encoder directions?
Thanks Anthony,
It looks like the installation instructions have not changed then. Thanks.
73 de va7qi, ....Erik.
It looks like the installation instructions have not changed then. Thanks.
73 de va7qi, ....Erik.
-
- Posts: 17
- Joined: Wed Aug 11, 2021 8:05 pm
Re: Changing Encoder directions?
I have managed to change the encoder direction, but I had to manually edit the GPio.props file, it doesn't seem to save/use the settings if it changed using the profile on the initialisation screen.