Thetis not transmitting with WSJT-x

[Miki]

Hello,

I had to reinstall my Thetis as I had done something and had no idea what I had done, so it was easier to perform a reinstall.
I have an issue where WSJT-x appears to send a carrier in Thetis but after an hour or so I check on pskreporter and I have not transmitted at all.

I have some screenshots but for the likes of me I am unable to see what is happening.

I did use the Measuring and adjusting guide at viewtopic.php?f=13&t=3574 before posting..

I am hoping someone is able to help me, Thank You.

Weird carrier from WSJT-x

Wsjt-x modulation.jpg (694.43 KiB) Viewed 1649 times

Thetis Audio Settings

Thetis-audio.jpg (167.4 KiB) Viewed 1649 times

WSJT-x Audio Settings

WSJT-x.jpg (81.88 KiB) Viewed 1649 times

Thetis Transmit Settings

Thetis-a.jpg (123.84 KiB) Viewed 1649 times

WSJT-x COM Ports

WSJT-x1.jpg (126.49 KiB) Viewed 1649 times

Orban

Orban.jpg (119.5 KiB) Viewed 1649 times

[w9mdb]

What's your callsign? We can check other source for your transmissions.

Have you checked your time at http://time.is?

Mike W9MDB

[ramdor]

I checked VK5MN and whist rx'ing ok, no signals received by other stations for VK5MN

edit: I assume the 6w is getting out

[Miki]

I checked VK5MN and whist rx'ing ok, no signals received by other stations for VK5MN

edit: I assume the 6w is getting out

I thought I was getting out, but appears not too..
I have been trying for about 3 days now...

As you can see in the first pic, its a weird signal, if you call it that...

[ramdor]

audio levels into thetis ok? what is the mic meter saying when it txs?

[Miki]

mic meter at -0.1dB

Screenshot attached..

meter.jpg (54.6 KiB) Viewed 1617 times

[ramdor]

that looks fine. Perhaps switch on DUP and see what the TX is like. Also use MON to 'hear' if it sounds ok. Only other thing is perhaps for some reason it is off frequency and outside the rx width of other stations?

[Miki]

It sounds like there are 2 tones, I have recorded it so you can blow your ear drums

DUP is on and MON does not do anything.

wsjt audio.mp3

(141.2 KiB) Downloaded 82 times

[w-u-2-o]

Please post screen shots of WSJT-X both receiving and transmitting.

[Mike_N1JEZ]

It sounds to me like there are two signals in there very closely spaced...
Mike, N1JEZ

[w9mdb]

In File/Settings/Advanced make sure you do NOT have Tone Spacing X2 or X4 checked.

[ramdor]

In File/Settings/Advanced make sure you do NOT have Tone Spacing X2 or X4 checked.

yeah that is probably it Mike ! the audio does seem to be 100+hz of bandwidth

[Miki]

It sounds to me like there are two signals in there very closely spaced...
Mike, N1JEZ

Yes there seems to be..

In File/Settings/Advanced make sure you do NOT have Tone Spacing X2 or X4 checked.

Once I have done that, I can hear it through my speakers, I can even see my self in JTAlert,

JTAlert.jpg (97.47 KiB) Viewed 1466 times

It seems to be looping somewhere..