apache-labs.com

Installed pre-release 5. So far after running for several hours, it has been rock stable. No overflows and underflows of any kind. I have to look close just to be sure the numbers are changing! Everything I have tried has worked smoothly.
Thanks Ritchie Thetis just gets better and better.
James
WD5GWY

Installed pre release 5 and noticed that if you hold the mouse over CM indicator logo the pop up info message flashes on/off. Anyone else seeing this ? CAT TCP enabled message next to it works ok.

Hi Tony,
Not seeing the blinking cmASIO icon, looks steady here on pre-5.
My CAT/TCI icon is OFF however.
73,
Bryan

Tony EI7BMB wrote:Installed pre release 5 and noticed that if you hold the mouse over CM indicator logo the pop up info message flashes on/off. Anyone else seeing this ? CAT TCP enabled message next to it works ok.

this happens with some/all status bar tool tip text afaik, some external program perhaps interacting with it, or some other reason. Not looked into it but I am aware. The toot tip text is only set once at startup for the cmASIO icon, and not/shown hidden by any code, so it hiding/showing is some failing of windows/statusbar/the universe/simulation

seems to be caused by mouse pointer entering the tool tip, causing mouse leave event on the icon, closing the tooltip, and then it cycles. Just have to live with it for now as I don't really have plans to re-write Microsoft's tool tip system This can also be seen if you move/expand the console window so the status bar is very close/slightly behind the desktop TaskBar.

Just turn off CAT/TCI and it works FB

W4WMT wrote:Just turn off CAT/TCI and it works FB

if only

Can't duplicate your bug.
Works fine here OM

W4WMT wrote:Can't duplicate your bug.
Works fine here OM

not my bug

Tony EI7BMB wrote:Installed pre release 5 and noticed that if you hold the mouse over CM indicator logo the pop up info message flashes on/off. Anyone else seeing this ? CAT TCP enabled message next to it works ok.

It happened to me once since installing pre-release 5. Flashing occurs when hovering the mouse over TCI, CAT/TCP, or CM. Restarting Thetis stopped the flashing.

Haven't seen it occur since.

Paul, W9AC

I also have the flashing. Began on prerelease 4 when there was only the cmASIO icon on the left. Now all 3 icons work solid the first time and then flash after that.

W9EZ

Thanks guys. As Richie says no big deal right now.

W9EZ wrote:I also have the flashing. Began on prerelease 4 when there was only the cmASIO icon on the left. Now all 3 icons work solid the first time and then flash after that.

W9EZ

they flash/cycle all the way back to v2.6.9 which was the first version that had the status bar, back in Jan 2020

W9EZ wrote:I also have the flashing. Began on prerelease 4 when there was only the cmASIO icon on the left. Now all 3 icons work solid the first time and then flash after that.

W9EZ

It's in Thetis since 2.6.9 and it's a microsoft bug. Case closed.

73 Ernst

I feel jealous because I can't make it flash here

Wanna swap ?

W4WMT wrote:I feel jealous because I can't make it flash here

Awesome.. THanks for the replies guys.. Not much of an issue I guess since I really hadn't noticed or tried to use them until the cmASio icon came about.

Tony EI7BMB wrote:Installed pre release 5 and noticed that if you hold the mouse over CM indicator logo the pop up info message flashes on/off. Anyone else seeing this ? CAT TCP enabled message next to it works ok.

I think I am replicating this issue correctly.

This issue occurs when you have the taskbar of Thetis close to the top of the Windows taskbar, and you hover the mouse position at the bottom of the icon, it is trying to display the info behind the associated icon and cant expand the pop out info box fully. If you raise the This application away a little from the Windows Taskbar it should no longer flash. You can also position the mouse curser at the top of the Thetis taskbar icon and the callout box describing what the icon is should display and not flash.

Cheers

Thanks Phil

Thetis v2.10.3.5 final release is out over on github here : https://github.com/ramdor/Thetis/releases

Cheers for all the testing during the pre-release stages. Have a good Christmas folks. Cheers.

Overview video : https://youtu.be/aTvEznU2fY8?si=I9vJ1bnUVAPN0lEO

Thanks so much Richie,
I looked over all of your cleanup of so much of the massive lines of code! All I can say is you must be super fast at working lines of code. I couldn’t believe all of the work you did and with all of the great additions. Thanks again to all for the great updates and additions.

73’s
Joe
WD5Y

Thanks Richie, Happy XMas

ramdor wrote:Thetis v2.10.3.5 final release is out over on github here : https://github.com/ramdor/Thetis/releases

Cheers for all the testing during the pre-release stages. Have a good Christmas folks. Cheers.

Overview video : https://youtu.be/aTvEznU2fY8?si=I9vJ1bnUVAPN0lEO

First of all, thanks for the final release.

But unfortunately I have a problem with the 6m band.

After installing the final release, RX on 6m band is about 20db lower.
Going back to pre-release 5 cured the problem.

I am seeing the same here on 6m

ea3aqr wrote:

ramdor wrote:Thetis v2.10.3.5 final release is out over on github here : https://github.com/ramdor/Thetis/releases



But unfortunately I have a problem with the 6m band.

After installing the final release RX on 6m band is about 20db lower.
Going back to pre-release 5 cured the problem.

Thank you Richie for all your hard work
Happy Xmas and new year to you and your family
and to all on the forum

73s

liam

Tony EI7BMB wrote:I am seeing the same here on 6m

ea3aqr wrote:

ramdor wrote:Thetis v2.10.3.5 final release is out over on github here : https://github.com/ramdor/Thetis/releases



But unfortunately I have a problem with the 6m band.

After installing the final release RX on 6m band is about 20db lower.
Going back to pre-release 5 cured the problem.

UPDATE: fix to 6m lna. Same version number but titlebar will show 'u1'. Please test.

The spaceship would now be heading the wrong direction as a damn pesky ! was removed in the code clean.

U1 looks good here Richie , even have an E's opening on 6 to test with

ramdor wrote:

Tony EI7BMB wrote:I am seeing the same here on 6m

ea3aqr wrote:

UPDATE: fix to 6m lna. Same version number but titlebar will show 'u1'. Please test.

The spaceship would now be heading the wrong direction as a damn pesky ! was removed in the code clean.

pesky_pling.png

Tony EI7BMB wrote:U1 looks good here Richie , even have an E's opening on 6 to test with

Thanks for the quick test. Yeah there were thousands of lines of code junked in the project. I should have probably run a pre-release-6

no worries, thanks again for all the work

ramdor wrote:Thetis v2.10.3.5 final release is out over on github here : https://github.com/ramdor/Thetis/releases

Cheers for all the testing during the pre-release stages. Have a good Christmas folks. Cheers.

Overview video : https://youtu.be/aTvEznU2fY8?si=I9vJ1bnUVAPN0lEO

Yes thanks for all the hard effort to get thetis to where it is. Running superbly on the ANAN and Andromeda. Have a great Christmas and New Years, with your family / friends and be safe.