Weird display in VFO B

JJ4SDR
Posts: 453
Joined: Fri Jul 30, 2021 10:09 pm
Location: TEXAS, USA

Weird display in VFO B

Postby JJ4SDR » Sat Apr 09, 2022 2:54 am

Kind of surprised at seeing "LSB 5.0k" in VFO B. Did get on 15m CW today which is right, but why the rest is out of kilter?
JJ
PC: 8 Core i7-10700 CPU @ 2.90GHz, NVMe SK Hynix 512 GB SSD, 32GB RAM
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
User avatar
w-u-2-o
Posts: 5598
Joined: Fri Mar 10, 2017 1:47 pm

Re: Weird display in VFO B

Postby w-u-2-o » Sat Apr 09, 2022 11:21 am

What should it have said, so we can try to replicate your issue?
JJ4SDR
Posts: 453
Joined: Fri Jul 30, 2021 10:09 pm
Location: TEXAS, USA

Re: Weird display in VFO B

Postby JJ4SDR » Sat Apr 09, 2022 11:45 pm

Scott,

It should have said CW with the bandwidth of 1k or perhaps I don't understand this...... I was using XIT trying to work a DX on 15 so I expected a "corresponding" mode indication and bandwidth. Don't understand where the LSB and 5k bandwidth came from as I don't often go that wide on LSB......and I don't often use VFO B (I assume that when I am on VFO A and select the XIT feature VFO B isn't evoked at all.....)

JJ
PC: 8 Core i7-10700 CPU @ 2.90GHz, NVMe SK Hynix 512 GB SSD, 32GB RAM
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
NC3Z
Posts: 466
Joined: Sun Oct 29, 2017 8:57 pm
Location: Merritt, NC

Re: Weird display in VFO B

Postby NC3Z » Sat Apr 09, 2022 11:49 pm

How about a screenshot? Otherwise we dont have a clue what you are seeing.
Gary NC3Z
User avatar
w-u-2-o
Posts: 5598
Joined: Fri Mar 10, 2017 1:47 pm

Re: Weird display in VFO B

Postby w-u-2-o » Sat Apr 09, 2022 11:53 pm

Excellent suggestion, Gary! That would be most helpful, and probably the quickest path to success.

It needs to be of the entire user interface, not just a close up of VFO B
JJ4SDR
Posts: 453
Joined: Fri Jul 30, 2021 10:09 pm
Location: TEXAS, USA

Re: Weird display in VFO B

Postby JJ4SDR » Tue Apr 12, 2022 8:57 pm

Below, see screen capture.
VFO B Display.jpg
VFO B Display.jpg (365.43 KiB) Viewed 2278 times
PC: 8 Core i7-10700 CPU @ 2.90GHz, NVMe SK Hynix 512 GB SSD, 32GB RAM
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
User avatar
w-u-2-o
Posts: 5598
Joined: Fri Mar 10, 2017 1:47 pm

Re: Weird display in VFO B

Postby w-u-2-o » Tue Apr 12, 2022 9:21 pm

That is strange. I was not able duplicate that configuration. I put VFO A on 40M. Then I activated RX2 and manually set the frequency, mode and filter bandwidth to LSB and 5K. Then I disabled RX2. VFO B mode and bandwidth reverted to the same as VFO A. Try as I might, I cannot get VFO B to have a different mode and bandwidth from VFO A when RX2 is disabled.

It might be that your database is corrupt somehow. You might try saving it and going back to a reset database to see if the condition persists.
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Weird display in VFO B

Postby ramdor » Tue Apr 12, 2022 10:35 pm

BTW, There have been one or two fixes since 2020.

Code: Select all

21j
fix: labels on VFOB box show correct mode and filter when RX1 is the only rx in use


Yep, old version as per the screenshot......

OldData_PayItNoMind_C3PO.png
OldData_PayItNoMind_C3PO.png (13.49 KiB) Viewed 2253 times
JJ4SDR
Posts: 453
Joined: Fri Jul 30, 2021 10:09 pm
Location: TEXAS, USA

Re: Weird display in VFO B

Postby JJ4SDR » Thu Apr 14, 2022 4:01 pm

Thanks Richie! Yup....I am using P1, Thetis version that came with my radio still :lol:
PC: 8 Core i7-10700 CPU @ 2.90GHz, NVMe SK Hynix 512 GB SSD, 32GB RAM
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: Weird display in VFO B

Postby ramdor » Thu Apr 14, 2022 4:23 pm

JJ4SDR wrote:Thanks Richie! Yup....I am using P1, Thetis version that came with my radio still :lol:


Yeah, you need to install a new version ;)

Richie.

Return to “Thetis”