Hi,
I have been enjoying playing with different audio processing tools now that I got Live Professor 2 (VST Host) working with Thetis, but I am puzzled by the TX Equalizer setting. When I created the TX profile (I didn't save the TX profile per se) I switched off the TX Equalizer completely, but after switching Thetis and the hardware unit off and switching everything back on I see that the TX Equalizer box (in Thetis) is checked although I left it unchecked. I exported the Data base as well for me to load it later as I also process audio using the wonderful tools inside Thetis only. I obviously use a different Data base in that scenario.
Thoughts?
JJ
Why does TX EQ revert to ON?
Why does TX EQ revert to ON?
PC: 8 Core i7-10700 CPU @ 2.90GHz, NVMe SK Hynix 512 GB SSD, 32GB RAM
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
Re: Why does TX EQ revert to ON?
TX EQ on/off state is stored in the tx profile
You can select an option in setup to highlight everything that is stored in a TX profile, for checking purposes.
R.
You can select an option in setup to highlight everything that is stored in a TX profile, for checking purposes.
R.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Why does TX EQ revert to ON?
Wow! You are fast
Thanks a lot!
JJ
Thanks a lot!
JJ
PC: 8 Core i7-10700 CPU @ 2.90GHz, NVMe SK Hynix 512 GB SSD, 32GB RAM
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
Re: Why does TX EQ revert to ON?
ramdor wrote:TX EQ on/off state is stored in the tx profile
You can select an option in setup to highlight everything that is stored in a TX profile, for checking purposes.
tx_eq_prof.jpg
R.
Hey,
I don't see the parameters below at all behind the Transmit tab.
- Attachments
-
- These Transmit Tab Parameters are missing.jpg (11.52 KiB) Viewed 3161 times
PC: 8 Core i7-10700 CPU @ 2.90GHz, NVMe SK Hynix 512 GB SSD, 32GB RAM
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
Re: Why does TX EQ revert to ON?
JJ4SDR wrote:ramdor wrote:TX EQ on/off state is stored in the tx profile
You can select an option in setup to highlight everything that is stored in a TX profile, for checking purposes.
R.
Hey,
I don't see the parameters below at all behind the Transmit tab.
viewtopic.php?f=9&t=3817
Richie.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Why does TX EQ revert to ON?
Richie,
Not sure if this has anything to do with my observation but I am using P1 and will only start using P2 once I am much more familiar with Thetis.
Best!
JJ
Not sure if this has anything to do with my observation but I am using P1 and will only start using P2 once I am much more familiar with Thetis.
Best!
JJ
PC: 8 Core i7-10700 CPU @ 2.90GHz, NVMe SK Hynix 512 GB SSD, 32GB RAM
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
Re: Why does TX EQ revert to ON?
JJ4SDR wrote:Richie,
Not sure if this has anything to do with my observation but I am using P1 and will only start using P2 once I am much more familiar with Thetis.
Best!
JJ
The link was to the beta/patched version of Thetis which can run P1 or P2. The beta includes the check box for highlighting TX profile items, amongst many other things.
Cheers, Richie.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Why does TX EQ revert to ON?
ramdor wrote:JJ4SDR wrote:Richie,
Not sure if this has anything to do with my observation but I am using P1 and will only start using P2 once I am much more familiar with Thetis.
Best!
JJ
The link was to the beta/patched version of Thetis which can run P1 or P2. The beta includes the check box for highlighting TX profile items, amongst many other things.
Cheers, Richie.
Hi Richie!
Thanks for the clarification. When I clicked on the link a page chock-full of items came up so (newbie that I am) it was somewhat bewildering to see that . Also, I have never done operated in other than Thetis v.2.8.11 so I will need to figure our how best get that version loaded (again, I want to stick with P1 for the time being due my inexperience with Thetis).
Thanks!
JJ
PC: 8 Core i7-10700 CPU @ 2.90GHz, NVMe SK Hynix 512 GB SSD, 32GB RAM
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
Re: Why does TX EQ revert to ON?
ramdor wrote:JJ4SDR wrote:ramdor wrote:TX EQ on/off state is stored in the tx profile
You can select an option in setup to highlight everything that is stored in a TX profile, for checking purposes.
R.
Hey,
I don't see the parameters below at all behind the Transmit tab.
viewtopic.php?f=9&t=3817
Richie.
Richie: Does this patch work with Protocol 1 or is it tied to Protocol 2? I am just learning how to walk and won't upgrade to Protocol 2 until after I have learnt how to run? Will need to learn how to run patches too.
Best!
JJ
PC: 8 Core i7-10700 CPU @ 2.90GHz, NVMe SK Hynix 512 GB SSD, 32GB RAM
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
Re: Why does TX EQ revert to ON?
JJ4SDR wrote:ramdor wrote:JJ4SDR wrote:
Hey,
I don't see the parameters below at all behind the Transmit tab.
viewtopic.php?f=9&t=3817
Richie.
Richie: Does this patch work with Protocol 1 or is it tied to Protocol 2? I am just learning how to walk and won't upgrade to Protocol 2 until after I have learnt how to run? Will need to learn how to run patches too.
Best!
JJ
thetis 2.8.11 and the patches that follow can run both Protocol 1 and Protocol 2.
Richie.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: Why does TX EQ revert to ON?
ramdor wrote:JJ4SDR wrote:
Richie: Does this patch work with Protocol 1 or is it tied to Protocol 2? I am just learning how to walk and won't upgrade to Protocol 2 until after I have learnt how to run? Will need to learn how to run patches too.
Best!
JJ
thetis 2.8.11 and the patches that follow can run both Protocol 1 and Protocol 2.
Richie.
As always, thank you Richie!
JJ
PC: 8 Core i7-10700 CPU @ 2.90GHz, NVMe SK Hynix 512 GB SSD, 32GB RAM
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18
Windows 10 Home, Version 22H2
Thetis v2.10.4.3 x64
Protocol 2 v2.1.18