band edges

User avatar
oe3ide
Posts: 389
Joined: Tue May 05, 2020 8:36 am
Location: JN78XK
Contact:

band edges

Postby oe3ide » Tue Jul 13, 2021 7:34 pm

Hi,

just noticed on the 40m band, that the band edges (red vertical lines) are not corresponding with the values in the database.xml.
Selected region in setup is "Europe".
Same on 80m. IARU 1 ends at 3.8 Mhz. Red band-edge line is at 4 Mhz.
Any ideas?

See screenshots...

band-edges-database.jpg
band-edges-database.jpg (438.56 KiB) Viewed 2285 times


band-edges-40m.jpg
band-edges-40m.jpg (980 KiB) Viewed 2285 times
User avatar
ramdor
Posts: 1468
Joined: Wed Jul 03, 2019 3:07 pm
Contact:

Re: band edges

Postby ramdor » Tue Jul 13, 2021 8:16 pm

Nope, they are hard coded into the display class. I remember having to update them in there at some point a couple of years ago now. All needs a re-work sorry to say :/

Richie.
User avatar
oe3ide
Posts: 389
Joined: Tue May 05, 2020 8:36 am
Location: JN78XK
Contact:

Re: band edges

Postby oe3ide » Tue Jul 13, 2021 8:23 pm

Ok, thanks Richie for the info. I thought I am doing something wrong..

73 Ernst
DO2ZA Erwin
Posts: 115
Joined: Fri Apr 21, 2017 4:49 pm

Re: band edges

Postby DO2ZA Erwin » Wed Jul 14, 2021 11:14 am

Hi Ernst and Ritchie,

here at my Side all is ok, 80 m 3,5 -- 3,8 Mhz, 40 m also 7,000 -- 7,200

Using 21c Prot. 2 EDIT: Region is set to Germany

Greetings

Erwin
Anan 7000DLE MK2 black, P.2 v2.1.18, WIN 10, 10.0.18362 (1903), i7-7700 @3.60 Ghz, 2x Monitor 24"@144 Hz and 1x 32" Monitor @120 FPS for Thetis
User avatar
oe3ide
Posts: 389
Joined: Tue May 05, 2020 8:36 am
Location: JN78XK
Contact:

Re: band edges

Postby oe3ide » Wed Jul 14, 2021 12:28 pm

Ok, just set the region to "Region 1" ... all perfect now.
Thank you Erwin, for the tip!

73 Ernst

Return to “Thetis”