Hi,
just noticed on the 40m band, that the band edges (red vertical lines) are not corresponding with the values in the database.xml.
Selected region in setup is "Europe".
Same on 80m. IARU 1 ends at 3.8 Mhz. Red band-edge line is at 4 Mhz.
Any ideas?
See screenshots...
band edges
Re: band edges
Nope, they are hard coded into the display class. I remember having to update them in there at some point a couple of years ago now. All needs a re-work sorry to say :/
Richie.
Richie.
Richie - MW0LGE - https://www.qrz.com/db/mw0lge
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Latest Release [2.10.3.5] : https://github.com/ramdor/Thetis/releases/tag/v2.10.3.5
Latest Work In Progress : https://github.com/ramdor/Thetis/releas ... .3.6-dev_2
Re: band edges
Ok, thanks Richie for the info. I thought I am doing something wrong..
73 Ernst
73 Ernst
-
- Posts: 115
- Joined: Fri Apr 21, 2017 4:49 pm
Re: band edges
Hi Ernst and Ritchie,
here at my Side all is ok, 80 m 3,5 -- 3,8 Mhz, 40 m also 7,000 -- 7,200
Using 21c Prot. 2 EDIT: Region is set to Germany
Greetings
Erwin
here at my Side all is ok, 80 m 3,5 -- 3,8 Mhz, 40 m also 7,000 -- 7,200
Using 21c Prot. 2 EDIT: Region is set to Germany
Greetings
Erwin
Anan 7000DLE MK2 black, P.2 v2.1.18, WIN 10, 10.0.18362 (1903), i7-7700 @3.60 Ghz, 2x Monitor 24"@144 Hz and 1x 32" Monitor @120 FPS for Thetis
Re: band edges
Ok, just set the region to "Region 1" ... all perfect now.
Thank you Erwin, for the tip!
73 Ernst
Thank you Erwin, for the tip!
73 Ernst