Software:
Thetis_V2.6.5.0_Setup.msi
Thetis_V2.6.6.0_Setup.msi
Firmware:
Hermes_Protocol_2_v10.7.rbf
Everything seems to work fine but no RF-Output at all.
Monitoring and ALC-Indiction are ok.
Any thougts ?
73 Walter
ANAN100 no TX-Output
Re: ANAN100 no TX-Output
w9mdb wrote:Did you try a database reset?
Database is complete virgin. Only parameter changed was Radio Model.
73 Walter