Thetis 2.6.2 and RX2 controls missing.
Posted: Thu Feb 14, 2019 4:15 pm
Hello all,
I did the usual searching and didn't find any reference to an issue like this. I'm running Firmware 10.5 and Thetis 2.6.2. With both receivers set to 192 KHz and RX2 activated and displaying on the screen fine, I don't get any other controls displayed for RX2. So I appear to be unable to control things like modes, muting and just about everything else. I can change the frequency on the spectrum display and the VFO window. But that's about it.
Am I missing something? A setting?
Thank you,
Ed
WD4ED
I did the usual searching and didn't find any reference to an issue like this. I'm running Firmware 10.5 and Thetis 2.6.2. With both receivers set to 192 KHz and RX2 activated and displaying on the screen fine, I don't get any other controls displayed for RX2. So I appear to be unable to control things like modes, muting and just about everything else. I can change the frequency on the spectrum display and the VFO window. But that's about it.
Am I missing something? A setting?
Thank you,
Ed
WD4ED