BAND SELECTOR CHANGES TO SWL when Ham band selected or vice-versa
Posted: Sat Jan 05, 2019 1:43 pm
Thetis 2.6.2 Win64 ANAN200D , Firmware Ver 1.4
"sticky" Band selector screen : changes to yellow broadcast band mode every time a new Ham band is chosen
Dear All , this problem was already reported by FM5GP (Phill)
It appeared after several hours of " no problem"
After reloading the database the problem became reversed ( the "sticky mode became the Ham band screen each tilme a SWL band was selected
I tried retsetting the data base and the problem disappeared but when I relaod my database the problem returns.
This is particularly annoying because the band selector no longer displays which band you are using and it slows down band changing
Actually what happens is : you select ( for example ) 10m band , the radio switches to 10 m band ( normal) but the band selector no longer displays the ham bands , it displays the SWL bands instead. and If you want to switch to 20 m band , you need first to type "HF" and the screen displays the Ham bands again , then you press the 20m button and the radio swhitches to 20 m band , but instantly the band selectro sub-screen rev erts to SWL ( yellow) mode , HF bands no longer displayed .
Any advice appreciated
Thanks best 73
Pierre
F6IES
"sticky" Band selector screen : changes to yellow broadcast band mode every time a new Ham band is chosen
Dear All , this problem was already reported by FM5GP (Phill)
It appeared after several hours of " no problem"
After reloading the database the problem became reversed ( the "sticky mode became the Ham band screen each tilme a SWL band was selected
I tried retsetting the data base and the problem disappeared but when I relaod my database the problem returns.
This is particularly annoying because the band selector no longer displays which band you are using and it slows down band changing
Actually what happens is : you select ( for example ) 10m band , the radio switches to 10 m band ( normal) but the band selector no longer displays the ham bands , it displays the SWL bands instead. and If you want to switch to 20 m band , you need first to type "HF" and the screen displays the Ham bands again , then you press the 20m button and the radio swhitches to 20 m band , but instantly the band selectro sub-screen rev erts to SWL ( yellow) mode , HF bands no longer displayed .
Any advice appreciated
Thanks best 73
Pierre
F6IES