Page 1 of 1

SDRConsole and Anan 7000DLE MKII

Posted: Mon Apr 12, 2021 5:20 pm
by HB9LFQ
Hi all,

I just got my Anan 7000DLE MKII and updated it to Protocol 2 (2,20b). Everything works fine with Thetis.
SDR Console 3.0.27 detects the radio without problems and I can use it (TX/RX) on 80m and 40m. But 30m and up
I have no signals (only some spurious signals). Seems like the wrong bandpass filters are selected or similar.
Does anyone have an idea how to solve this?
I attached a picture how 20m looks in SDR Console (20m.jpg) and one minute later in Thetis (20m_Thetis.jpg).

73,
András / HB9LFQ

Re: SDRConsole and Anan 7000DLE MKII

Posted: Mon Apr 12, 2021 5:57 pm
by w-u-2-o
You will probably have contact Simon Brown, the author of SDR Console.

Re: SDRConsole and Anan 7000DLE MKII

Posted: Mon Apr 12, 2021 11:04 pm
by kc2rgw
I would try the .26 version maybe as .27 is the latest pre-release. The TX audio is better with Thetis though and you get Pure Signal as well. Been a while but I don’t think Diversity is implemented either.

SDRConsole, though I love it with other receivers I have, is not a full function equal to Thetis.

Re: SDRConsole and Anan 7000DLE MKII

Posted: Tue Apr 13, 2021 1:43 am
by K1LSB
András,

I tried my 7000DLE MKII running Protocol 2 on SDR Console V3.0.27 tonight and it behaved correctly on all bands (at least the bands I have antennae for, 80 thru 17).

Mark

Re: SDRConsole and Anan 7000DLE MKII

Posted: Tue Apr 13, 2021 7:58 am
by PD3LK
Nothing wrong with SDRC, to be honest i don't see any decent signals on your Thetis screenshot too.

Re: SDRConsole and Anan 7000DLE MKII

Posted: Tue Apr 13, 2021 4:01 pm
by HB9LFQ
Hi all,

many thanks for the feedback. I already wrote to the SDR Console mailing list, but no reaction. I flashed Firmware 2.19 as well, but the
same result.

73,
András

Re: SDRConsole and Anan 7000DLE MKII

Posted: Wed Apr 14, 2021 5:29 am
by PD3LK
Hello Andras, the correct forum address is: https://forum.sdr-radio.com
Please register and place your question under Forums and add a full screenshot of SDRC there, please never cut the pictures.

When using the build-in Screen Capture button in SDRC then also mention the SDRC version (due to a little bug the version doesn't show up on the screenshots). Regards PD3LK, Leon