8000dle and sdr console ver 3.0.022

N2XD
Posts: 22
Joined: Sun Apr 09, 2017 8:43 pm
Location: Franklin,NC

8000dle and sdr console ver 3.0.022

Postby N2XD » Tue Apr 21, 2020 8:35 pm

I just downloaded ver 3.0.22 of sdr console. My first attempt to use SDR Console. Started SDR console and it operates for around 30 seconds and stops. I know I'm missing something on my end, I have the 8000DLE selected I stop the SDR console and restart and the same thing happens. Any help would be appreciated. Thanks.

John N2XD
PD3LK
Posts: 194
Joined: Mon Nov 11, 2019 8:45 pm
Location: Apeldoorn, NLD

Re: 8000dle and sdr console ver 3.0.022

Postby PD3LK » Tue Apr 21, 2020 11:24 pm

Hi John, do you have updated the 8k with Protocol 2? SDRC doesn't work with Prot.1.
If you have P2 than it's proberbly a bad network connection or your router is to slow. P2 needs a 1Gb connection.
73 PD3LK Leon
User avatar
Tony EI7BMB
Posts: 651
Joined: Sun Apr 09, 2017 2:31 pm
Location: Dublin
Contact:

Re: 8000dle and sdr console ver 3.0.022

Postby Tony EI7BMB » Wed Apr 22, 2020 10:12 am

I had this problem and it turned out to be the firewall . https://www.sdr-radio.com/ANAN-Apache-Labs
N2XD
Posts: 22
Joined: Sun Apr 09, 2017 8:43 pm
Location: Franklin,NC

Re: 8000dle and sdr console ver 3.0.022

Postby N2XD » Wed Apr 22, 2020 11:56 am

Thanks for the suggestions. I am running the Ver 2 of the firmware as I am running the latest ver of Thetis and running on the same same router connection. I did check the firewall and all is fine there. I will have to keep looking.

John
User avatar
W1AEX
Posts: 425
Joined: Sun Apr 09, 2017 6:17 pm
Location: Connecticut, USA
Contact:

Re: 8000dle and sdr console ver 3.0.022

Postby W1AEX » Wed Apr 22, 2020 2:19 pm

Hi John,

I'm not sure how closely you looked at the firewall but Tony is correct that this is an acknowledged issue with the Windows firewall making duplicate rules that will block the "ack" confirmation handshake with SDR Console shortly after the program is started. When I encountered this problem with SDR Console I found a rule that was blocking TCP and UDP communication and set the rule to "Allow" and thought that was the end of it. Well... that didn't fix it because as it turns out, the firewall had made numerous duplicate rules blocking the connection for SDR Console. I cleaned all the "Not Allow" rules out (there were more than a dozen of them) and before starting SDR Console again I created an allow rule for TCP/UDP to allow communication for SDR Console. That seems to have ended the problem for me. At any rate, you might want to take a second look at all the rules that are up and down the list in the firewall, you may find that the firewall has been busy creating them without displaying a prompt to ask you.

73, Rob W1AEX
"One thing I am certain of is that there is too much certainty in the world."
N2XD
Posts: 22
Joined: Sun Apr 09, 2017 8:43 pm
Location: Franklin,NC

Re: 8000dle and sdr console ver 3.0.022

Postby N2XD » Wed Apr 22, 2020 3:10 pm

Hi Rob,
I will check this again. This might be beyond my pay grade. However it should be an adventure. Thanks.


John N2XD

Return to “SDR Console”