Version 3.0.17 on a Anan 7000DLE S/N-13
Posted: Wed Dec 25, 2019 7:04 pm
Hi Simon,
I have Ver 3.0.17 up and running with my Anan 7000DLE. TX and RX both working. I had to "allow" settings in the Win-10 firewall settings for SDR Console. Defaults are something like no PTT, Mike gain = 0, mic bias = off, TX output level = 0. Took me about half an hour going through the menus and settings to get TX working properly. I'll spend some time checking it out and will report back on this thread.
Best, John KB1YFD
I have Ver 3.0.17 up and running with my Anan 7000DLE. TX and RX both working. I had to "allow" settings in the Win-10 firewall settings for SDR Console. Defaults are something like no PTT, Mike gain = 0, mic bias = off, TX output level = 0. Took me about half an hour going through the menus and settings to get TX working properly. I'll spend some time checking it out and will report back on this thread.
Best, John KB1YFD