Version 3.0.17 on a Anan 7000DLE S/N-13

KB1YFD
Posts: 9
Joined: Fri Jun 16, 2017 9:10 pm

Version 3.0.17 on a Anan 7000DLE S/N-13

Postby KB1YFD » Wed Dec 25, 2019 7:04 pm

Hi Simon,

I have Ver 3.0.17 up and running with my Anan 7000DLE. TX and RX both working. I had to "allow" settings in the Win-10 firewall settings for SDR Console. Defaults are something like no PTT, Mike gain = 0, mic bias = off, TX output level = 0. Took me about half an hour going through the menus and settings to get TX working properly. I'll spend some time checking it out and will report back on this thread.

Best, John KB1YFD
NN3RP
Posts: 65
Joined: Sun Feb 25, 2018 1:53 pm

Re: Version 3.0.17 on a Anan 7000DLE S/N-13

Postby NN3RP » Wed Jan 15, 2020 9:03 pm

John, did you ever finish going through the SDR settings? I, like yours, have the default settings but don't know exactly what to change them to. What firewall setting did you allow?
Rafael / NN3RP
Nation's Capital USA
KB1YFD
Posts: 9
Joined: Fri Jun 16, 2017 9:10 pm

Re: Version 3.0.17 on a Anan 7000DLE S/N-13

Postby KB1YFD » Fri Feb 07, 2020 10:42 pm

Hi Rafael,

For firewall settings go to windows settings and search for firewall. Select "Allow an app through firewall". Find SDR console in the list and check allow. Everything else you need to change is in the SDR console application.

Best, John

Return to “SDR Console”