Hi Simon,
I have Ver 3.0.17 up and running with my Anan 7000DLE. TX and RX both working. I had to "allow" settings in the Win-10 firewall settings for SDR Console. Defaults are something like no PTT, Mike gain = 0, mic bias = off, TX output level = 0. Took me about half an hour going through the menus and settings to get TX working properly. I'll spend some time checking it out and will report back on this thread.
Best, John KB1YFD
Version 3.0.17 on a Anan 7000DLE S/N-13
Re: Version 3.0.17 on a Anan 7000DLE S/N-13
John, did you ever finish going through the SDR settings? I, like yours, have the default settings but don't know exactly what to change them to. What firewall setting did you allow?
Rafael / NN3RP
Nation's Capital USA
Nation's Capital USA
Re: Version 3.0.17 on a Anan 7000DLE S/N-13
Hi Rafael,
For firewall settings go to windows settings and search for firewall. Select "Allow an app through firewall". Find SDR console in the list and check allow. Everything else you need to change is in the SDR console application.
Best, John
For firewall settings go to windows settings and search for firewall. Select "Allow an app through firewall". Find SDR console in the list and check allow. Everything else you need to change is in the SDR console application.
Best, John