Current Status

User avatar
Simon
Posts: 35
Joined: Sun Apr 09, 2017 5:19 pm
Location: Mawnan Smith
Contact:

Current Status

Postby Simon » Mon Apr 17, 2017 6:51 am

Hi All,

Here's a brief post from a weary programmer:

1) I'm only supporting the new protocol aka protocol 2
2) I do have TX support
3) It's working with the Herems-based 10E - tester is Jeff KR3EP who uses SSB and AM
4) I have just received firmware for my 8000DLE and it is working - must have a few days of QSOs before I can declare this as being a 'good' firmware kit.

So there we are - I'll announce ANAN-related updates in this forum and my own Yahoo! group. I'm also building a 'Test For Updates' into the software so you can see what's what without surfing the web.

Toodles,
sdr-radio.com
User avatar
w-u-2-o
Posts: 454
Joined: Fri Mar 10, 2017 1:47 pm

Re: Current Status

Postby w-u-2-o » Mon Apr 17, 2017 11:32 am

Great stuff, Simon, thanks for the update!

73!

Scott
User avatar
w-u-2-o
Posts: 454
Joined: Fri Mar 10, 2017 1:47 pm

Re: Current Status

Postby w-u-2-o » Mon Apr 17, 2017 9:03 pm

I am also testing for Simon, on my 100D. It's definitely coming along! Below is SDR Console running edge to edge on my triple displays and showing all of 40M.

73!

Scott

Image
gi4fue
Posts: 2
Joined: Mon Apr 10, 2017 5:31 pm

Re: Current Status

Postby gi4fue » Mon Apr 17, 2017 10:17 pm

WOW!! looks fabulous Scott

Is anyone testing on the 100 Hermes board?

Charlie
PCRover
Posts: 1
Joined: Tue Apr 11, 2017 1:26 am

Re: Current Status

Postby PCRover » Mon Apr 17, 2017 10:32 pm

Will there be a 100 Hermes version or do I need to sell and upgrade?
User avatar
Simon
Posts: 35
Joined: Sun Apr 09, 2017 5:19 pm
Location: Mawnan Smith
Contact:

Re: Current Status

Postby Simon » Tue Apr 18, 2017 3:14 pm

PCRover wrote:Will there be a 100 Hermes version or do I need to sell and upgrade?


Yes, in fact the 100 is essentially the 10E with more power I think. Anyway, all ANAN which run the new protocol (protocol 2) are/will be supported.
sdr-radio.com
User avatar
w-u-2-o
Posts: 454
Joined: Fri Mar 10, 2017 1:47 pm

Re: Current Status

Postby w-u-2-o » Tue Apr 18, 2017 4:27 pm

Just to clarify:

The 100 is the 100W version of the 10. Both use the Hermes 16-bit card.

The 100B is the 100W version of the 10E. Both use the Hermes 14-bit card.

73,

Scott
Jdsbose
Posts: 4
Joined: Sun Apr 09, 2017 5:11 pm

Re: Current Status

Postby Jdsbose » Thu Aug 31, 2017 12:43 am

Any updates since April ? any ETA ?

Return to “SDR Console”