Hello,
a ham friend of mine is using piHPSDR from time to time. He is wondering whether there is a calibration menue for the S-Meter similar to Thetis/HPSDR.....
I did not find anything like this in the piHPSDR manuals. Is there a way to calibrate the S- meter?
TNX
Volker
DL4ZBG
piHPSDR S-Meter calibration
Re: piHPSDR S-Meter calibration
Hi Volker,
I haven't found any way to calibrate the S-meter and on my radio the S-meter shows about 6 dB low.
I took a - granted brief - look at the code to see if there was any obvious place to change the meter reading, but I did not find anything.
73 de va7qi ....Erik.
I haven't found any way to calibrate the S-meter and on my radio the S-meter shows about 6 dB low.
I took a - granted brief - look at the code to see if there was any obvious place to change the meter reading, but I did not find anything.
73 de va7qi ....Erik.
Re: piHPSDR S-Meter calibration
That's what I expected. More than 100 looks but nobody knows a solution.
TNX Erik for reply
73
Volker
TNX Erik for reply
73
Volker
Re: piHPSDR S-Meter calibration
Now on my G2 the S-meter is showing 5 dB more than it should. S9 = -73dBm and piHPSDR showing -68dBm.
Dear developers, is there any chance to correct this value, e.g. changing entries in config files?
I am not thinking of calibration functions in the software.
HW?
Volker
DL4ZBG
Dear developers, is there any chance to correct this value, e.g. changing entries in config files?
I am not thinking of calibration functions in the software.
HW?
Volker
DL4ZBG
Re: piHPSDR S-Meter calibration
In the "Radio" menue I found an rx gain correction. This is what I requested.
No further queries.
TNX
Volker
No further queries.
TNX
Volker