TX Profiles lost
Posted: Sat Jun 20, 2020 2:46 pm
When I installed "Virtual Audio Cables" and "MMTTY" for RTTY operation this afternoon I noticed that the last TX Profile that I used over the last few weeks has gone. It is not listed in the "Transmit Profile" selection of the main screen anymore. I think that another profile disappeared as well. These two profiles were the last two profiles at the bottom of the selection and I know I have them saved as I switch around between modes frequently and the last profile used always has been restored automatically whenever changing to USB/LSB
Some of the profiles in the 'Transmit Profile' selection are listed in the AppData>Roaming>FlexRadioSystems>PowerSDR folder however not all of them are listed there and unfortunately not the ones that disappeared from the selection list.
Is there any chance to retrieve the file/s or the setting/s and why are some of the TX profiles being saved in this folder but others not although the same procedure has been performed in each case (TX profile saved under the "Profiles" function)?
73 Roger, DL5RBW
Some of the profiles in the 'Transmit Profile' selection are listed in the AppData>Roaming>FlexRadioSystems>PowerSDR folder however not all of them are listed there and unfortunately not the ones that disappeared from the selection list.
Is there any chance to retrieve the file/s or the setting/s and why are some of the TX profiles being saved in this folder but others not although the same procedure has been performed in each case (TX profile saved under the "Profiles" function)?
73 Roger, DL5RBW