Microphone input

laserbill
Posts: 21
Joined: Thu Apr 05, 2018 8:43 am
Location: West Yorkshire

Microphone input

Postby laserbill » Wed May 30, 2018 8:22 am

Hi,
I am using the Anan 10 with OpenHPSDR 3.4.9
Is it possible to use the Microphone input on the front of the Anan 10 when I have the VAC1 connection enabled in the software.
I notice the Headphone socket is still active in VAC mode but the Mic input is disabled. Could I have missed a setting in the software?
I have Also posted the question to the Yahoo group
Thanks.
Bill G6SVN
User avatar
Tony EI7BMB
Posts: 651
Joined: Sun Apr 09, 2017 2:31 pm
Location: Dublin
Contact:

Re: Microphone input

Postby Tony EI7BMB » Wed May 30, 2018 8:29 am

Hi Bill, yes you can do this , take a look at the check boxes on the VAC 1 tab that start with "Allow PTT to overide/bypass VAC for phone" , you have three choices depending on how you key up TX.
laserbill
Posts: 21
Joined: Thu Apr 05, 2018 8:43 am
Location: West Yorkshire

Re: Microphone input

Postby laserbill » Wed May 30, 2018 8:48 am

Hi Tony,
Fantastic! Its working, It was the 3rd option...Allow Mox
Was getting RF feedback through powered speakers when using primary but don't when set to VAC as audio routed through HDMI on my monitor
Thanks a million
Bill
User avatar
Tony EI7BMB
Posts: 651
Joined: Sun Apr 09, 2017 2:31 pm
Location: Dublin
Contact:

Re: Microphone input

Postby Tony EI7BMB » Wed May 30, 2018 11:02 am

Happy to help Bill

Return to “PowerSDR mRX”