Power SDR fails to run

GW0DQW
Posts: 32
Joined: Sun Apr 09, 2017 4:21 pm
Location: Nr Cardiff
Contact:

Power SDR fails to run

Postby GW0DQW » Thu May 24, 2018 5:34 pm

HI there,

All of a sudden I have an issue with Power SDR failing to run.
I am using Win10 as always and yesterday loaded up Power sdr and the screen came on ok but after about 5 seconds before I can switch on the software the software closes down.

All version shave worked on this laptop for last 3/4 years with no issues at all , I am /was using the latest version of Power SDR 3.4.9.0 since it came out.
When the screen fails it doesn't lock up the laptop or anything.
I removed the current installation with a view of installing the software again which I did and the same thing happened again, now I am at a loss as I cannot use my Anan100 at all.

Anybody please give any hints or tips on how to cure this issue please.
Best 73 Chris GW0DQW :?:
NC3Z
Posts: 223
Joined: Sun Oct 29, 2017 8:57 pm
Location: Merritt, NC

Re: Power SDR fails to run

Postby NC3Z » Thu May 24, 2018 6:30 pm

I also had the issue out of the blue in the past week. My solution was to delete the database file and then PSDR would launch, then I imported by backup.
Gary NC3Z
NC3Z
Posts: 223
Joined: Sun Oct 29, 2017 8:57 pm
Location: Merritt, NC

Re: Power SDR fails to run

Postby NC3Z » Thu May 24, 2018 6:32 pm

Well I say out of the blue, but I was messing around with VAC settings when the issue came up, and it happened several times. Once I stopped messing with VAC settings I have not had the issue again.
Gary NC3Z
GW0DQW
Posts: 32
Joined: Sun Apr 09, 2017 4:21 pm
Location: Nr Cardiff
Contact:

Re: Power SDR fails to run

Postby GW0DQW » Thu May 24, 2018 6:34 pm

Thank you Gary , will try

73 Chris
GW0DQW
GW0DQW
Posts: 32
Joined: Sun Apr 09, 2017 4:21 pm
Location: Nr Cardiff
Contact:

Re: Power SDR fails to run

Postby GW0DQW » Thu May 24, 2018 7:01 pm

Gary

Many Many thanks ,

That cured it , makes me wonder what went wrong but there we are.

Best 73

Chris GW0DQW
NC3Z
Posts: 223
Joined: Sun Oct 29, 2017 8:57 pm
Location: Merritt, NC

Re: Power SDR fails to run

Postby NC3Z » Thu May 24, 2018 7:42 pm

That is good news, no idea on my end why it happened either. Were you doing anything with the VAC or anything else?
Gary NC3Z

Return to “PowerSDR mRX”