Angelia SDR and PA rx/tx relay

qst
Posts: 90
Joined: Fri Jul 28, 2017 9:44 pm

Angelia SDR and PA rx/tx relay

Postby qst » Sat Aug 12, 2017 7:03 pm

?Hello all,
My Angelia is already working with a hilberling amplifier. But i have problem connecting rx signal to SDR. Herme / Angelia have no tx / rx relay on board. How to make a connection from an external amplifier to the rx socket in the SDR to bring the signal? Do I need to perform an external tx / tx switch?
Slawomir
User avatar
w-u-2-o
Posts: 5544
Joined: Fri Mar 10, 2017 1:47 pm

Re: Angelia SDR and PA rx/tx relay

Postby w-u-2-o » Sun Aug 13, 2017 12:57 am

That is correct, Slawomir, you need to provision a TX/RX switch.

73,

Scott
qst
Posts: 90
Joined: Fri Jul 28, 2017 9:44 pm

Re: Angelia SDR and PA rx/tx relay

Postby qst » Sun Aug 13, 2017 2:35 pm

Hi Scott,
Thank you for your answer. Do you know the ready-made factory that will work with my amplifier? I think the switch must be built at the end of the chain and move the full power that the amplifier gives to the antenna. The power output of my PA limits the available solutions.
Slawomir
User avatar
w-u-2-o
Posts: 5544
Joined: Fri Mar 10, 2017 1:47 pm

Re: Angelia SDR and PA rx/tx relay

Postby w-u-2-o » Sun Aug 13, 2017 5:39 pm

My apologies, Slawomir, I do not have a good suggestion for you. Perhaps someone else might know?

73,

Scott
qst
Posts: 90
Joined: Fri Jul 28, 2017 9:44 pm

Re: Angelia SDR and PA rx/tx relay

Postby qst » Sun Aug 13, 2017 6:14 pm

Hi Scott,
I understand you perfectly. But probably among many of the Hermes SDR users are those who use factory-built external PA ?
Slawomir

Return to “PowerSDR mRX”