My built from spare parts Anan 100 is working but what is this?

Post your awesome projects here for everyone to marvel at!
Stu
Posts: 17
Joined: Tue Feb 06, 2018 9:21 pm

My built from spare parts Anan 100 is working but what is this?

Postby Stu » Thu Mar 08, 2018 6:44 pm

Hi All
My built up Anan 100 is working!
Just calibrated power out across the bands and setup the mic gain etc.
Had a low power qso and all seems ok except....

Quick question.
When tuning or transmitting and switching back to receive it is taking around 2 seconds for the receive panafall display to settle down to its normal level.
Immediately after transmit there is a thick orange band which gradually (2 seconds) goes back to normal.
There is no change to s meter noise level or volume of noise in headphones.
Whatever it is just seems to affect the waterfall.

Any idea why this is?
Thanks
Stu
User avatar
w-u-2-o
Posts: 5540
Joined: Fri Mar 10, 2017 1:47 pm

Re: My built from spare parts Anan 100 is working but what is this?

Postby w-u-2-o » Fri Mar 09, 2018 4:31 pm

Stu,

I can't duplicate your problem. Please post screen shots of your settings in Setup > Display > RX1, and Setup > Display > TX.

73,

Scott

Return to “PC's & Homebrew Hardware”