Anan 100 12v power rail?
Posted: Mon Feb 12, 2018 9:13 am
Hi All
I'm looking at the schematics for the 100W PA/Filter board and the Hermes board.
The PA board has the 13.8v power in and has a couple of regulators for 5v and 6v etc but there is no 12v Regulator.
As far as I can determine it uses the 12v power rail from the Alex header and therefore from the Hermes.
So does that mean the Hermes 12v regulator is powering all the filter board relays etc.
Or am I missing something ?
Thanks
Stu
I'm looking at the schematics for the 100W PA/Filter board and the Hermes board.
The PA board has the 13.8v power in and has a couple of regulators for 5v and 6v etc but there is no 12v Regulator.
As far as I can determine it uses the 12v power rail from the Alex header and therefore from the Hermes.
So does that mean the Hermes 12v regulator is powering all the filter board relays etc.
Or am I missing something ?
Thanks
Stu