Page 1 of 1

ANAN-100B

Posted: Mon Nov 04, 2019 2:16 pm
by w-u-2-o
If you have a Rev. 15 or 16 PA board then RX2 will be muted during TX and EXT1 will be used for PureSignal feedback.
If you have a Rev. 24 PA board then RX2 will not be muted during TX, and Bypass will be used for PureSignal feedback.

Hermes_14bt_Schematics.pdf
(188.87 KiB) Downloaded 3587 times

100W PA REV15A.pdf
(198.51 KiB) Downloaded 563 times

100W PA REV16.pdf
(199.37 KiB) Downloaded 554 times

100W PA REV24.pdf
(232.54 KiB) Downloaded 592 times