Preliminary F/W-versions - where to find?

FIRMWARE TOPICS ONLY--non-firmware topics will be MOVED
Forum rules
Until such time as the New Protocol firmware goes into general release, all discussion will be concentrated here.
User avatar
dl6eat
Posts: 45
Joined: Wed Feb 14, 2018 1:31 pm
Location: Ellerhoop - JO43VR
Contact:

Preliminary F/W-versions - where to find?

Postby dl6eat » Sat Nov 30, 2019 2:23 pm

Hi all,

I was now searching for quite a while but couldn't really find any folder or GitHub address for brand new latest beta firmware versions.
As an example - for the Orion MKII board in my ANAN 7000 there are 2 known preliminary firmware versions available, called Version 2_1 and 2_2.....at Github there is still only Version v1.9.

Think most of you are better informed than I, but since I already know of certain other hams who cant't direct themselve to the latest beta Versions as well I thought I open this Topic right here.

- Can anybody help me please on how to find the latest and greatest preliminray Firmware Versions for

- Orion MKII (only protocol 2)
- ANAN 10 (16 bit - Hermes - only protocol 2)


Especially on the Hermes board there is still this well known annoying issue that PS-A (Pure Signal) doesn't work in automode - only when using Singel Calibration. May be there is still anything better than v10.7?

Many thanks to all who can help here in advance! Have a great Christmas time!

73,

Andy - DL6EAT (W6EAT)
No knobs, Pure Signal and Thetis (open source)
ANAN 7000, ANAN 10, Intel NUC 8i7 32 GB + 16 GB Optane
User avatar
w-u-2-o
Posts: 5540
Joined: Fri Mar 10, 2017 1:47 pm

Re: Preliminary F/W-versions - where to find?

Postby w-u-2-o » Sat Nov 30, 2019 10:06 pm

For 16-bit Hermes, what you see in Github is all there is right now.

For the Orion MKII:

Capture.JPG
Capture.JPG (107.56 KiB) Viewed 4677 times
User avatar
dl6eat
Posts: 45
Joined: Wed Feb 14, 2018 1:31 pm
Location: Ellerhoop - JO43VR
Contact:

Re: Preliminary F/W-versions - where to find?

Postby dl6eat » Sun Dec 01, 2019 8:36 am

Thanks Scott,

I couldn't see that interesting folder before - may be my browser is playing it's own games here - I am currently travelling in Egypt.

Well, regarding the "old" ANAN-10 I was hoping that also in this area new preliminary F/W Versions come out from time to time.
It became pretty quite there at least....
Certainly not important but having Pure Signal also in auto-mode would be simply a real and great upgrade.
Think there are also many Hermes-boards out there - in addition there are many replicas by Gerd Loch (Berlin).
So the installed base should be huge.

Happy Christmas-time,

73,

Andy - SU/DL6EAT
No knobs, Pure Signal and Thetis (open source)
ANAN 7000, ANAN 10, Intel NUC 8i7 32 GB + 16 GB Optane

Return to “Protocol 2 Firmware (all radios)”