Preliminary F/W-versions - where to find?
Posted: Sat Nov 30, 2019 2:23 pm
Hi all,
I was now searching for quite a while but couldn't really find any folder or GitHub address for brand new latest beta firmware versions.
As an example - for the Orion MKII board in my ANAN 7000 there are 2 known preliminary firmware versions available, called Version 2_1 and 2_2.....at Github there is still only Version v1.9.
Think most of you are better informed than I, but since I already know of certain other hams who cant't direct themselve to the latest beta Versions as well I thought I open this Topic right here.
- Can anybody help me please on how to find the latest and greatest preliminray Firmware Versions for
- Orion MKII (only protocol 2)
- ANAN 10 (16 bit - Hermes - only protocol 2)
Especially on the Hermes board there is still this well known annoying issue that PS-A (Pure Signal) doesn't work in automode - only when using Singel Calibration. May be there is still anything better than v10.7?
Many thanks to all who can help here in advance! Have a great Christmas time!
73,
Andy - DL6EAT (W6EAT)
I was now searching for quite a while but couldn't really find any folder or GitHub address for brand new latest beta firmware versions.
As an example - for the Orion MKII board in my ANAN 7000 there are 2 known preliminary firmware versions available, called Version 2_1 and 2_2.....at Github there is still only Version v1.9.
Think most of you are better informed than I, but since I already know of certain other hams who cant't direct themselve to the latest beta Versions as well I thought I open this Topic right here.
- Can anybody help me please on how to find the latest and greatest preliminray Firmware Versions for
- Orion MKII (only protocol 2)
- ANAN 10 (16 bit - Hermes - only protocol 2)
Especially on the Hermes board there is still this well known annoying issue that PS-A (Pure Signal) doesn't work in automode - only when using Singel Calibration. May be there is still anything better than v10.7?
Many thanks to all who can help here in advance! Have a great Christmas time!
73,
Andy - DL6EAT (W6EAT)