Experience FW1.3 on Orion MKII
Posted: Sun Dec 16, 2018 5:30 pm
Hello,
tested with Thetis 2.6.2, very common Seq => 1,10,14,40,41 error, with activated 2RX Seq => 56,57,59.
When Seq appears, the LAN transmission stops for a short time.
If TX, SSB, without audio display 1-2mW TX power on powersdr.
Alex SPI Word incorrect, e.g. TX-> 2RX to GND without function, other not yet tested.
my HW:
first pc:
-TR4 1950X
-designare
-128gb ram
second pc (only for sdr):
- i7 4790
-16gb ram
-ecs itx pro board
last tested with Notebook Dell M4800 (i7 4810mq, 32gb RAM), always the same results…
best regards René
tested with Thetis 2.6.2, very common Seq => 1,10,14,40,41 error, with activated 2RX Seq => 56,57,59.
When Seq appears, the LAN transmission stops for a short time.
If TX, SSB, without audio display 1-2mW TX power on powersdr.
Alex SPI Word incorrect, e.g. TX-> 2RX to GND without function, other not yet tested.
my HW:
first pc:
-TR4 1950X
-designare
-128gb ram
second pc (only for sdr):
- i7 4790
-16gb ram
-ecs itx pro board
last tested with Notebook Dell M4800 (i7 4810mq, 32gb RAM), always the same results…
best regards René