Experience FW1.3 on Orion MKII

FIRMWARE TOPICS ONLY--non-firmware topics will be MOVED
Forum rules
Until such time as the New Protocol firmware goes into general release, all discussion will be concentrated here.
dj1yr
Posts: 52
Joined: Mon Apr 10, 2017 2:32 am

Experience FW1.3 on Orion MKII

Postby dj1yr » Sun Dec 16, 2018 5:30 pm

Hello,

tested with Thetis 2.6.2, very common Seq => 1,10,14,40,41 error, with activated 2RX Seq => 56,57,59.
When Seq appears, the LAN transmission stops for a short time.
If TX, SSB, without audio display 1-2mW TX power on powersdr.


Alex SPI Word incorrect, e.g. TX-> 2RX to GND without function, other not yet tested.

my HW:

first pc:
-TR4 1950X
-designare
-128gb ram

second pc (only for sdr):
- i7 4790
-16gb ram
-ecs itx pro board

last tested with Notebook Dell M4800 (i7 4810mq, 32gb RAM), always the same results…

best regards René

Return to “Protocol 2 Firmware (all radios)”