Orion 5.1 firmware released (current protocol/Protocol 1)

User avatar
w-u-2-o
Posts: 1875
Joined: Fri Mar 10, 2017 1:47 pm

Orion 5.1 firmware released (current protocol/Protocol 1)

Postby w-u-2-o » Fri Dec 01, 2017 3:21 pm

From Joe:

All,

Orion_v5.1 firmware for Orion MkI/ANAN-200D (Protocol 1) is available for download from the GitHub repository:

https://github.com/TAPR/OpenHPSDR-Firmware/tree/master/Protocol%201/Orion%20(ANAN-200D)

This version of firmware allows the user to change the Rx5 frequency during Tx or Rx when PureSignal mode is inactive. As before, when PureSignal mode is enabled Rx5 is dedicated to providing rf feedback to the Orion board for PureSignal support during transmit mode.

73, Joe K5SO
DO2ZA Erwin
Posts: 45
Joined: Fri Apr 21, 2017 4:49 pm

Re: Orion 5.1 firmware released (current protocol/Protocol 1)

Postby DO2ZA Erwin » Fri Dec 01, 2017 3:54 pm

Hello,

I have installed V 5.1, after that Pure-Signal on my 200D, Board 24, is not working. It is on, but no feedback from internal Coupler.
Going back to 5.0 all is ok again.

73 Erwin
Anan 200D rev.24, WIN 10, 10.0.18362 (1903), i7-7700 @3.60 Ghz, 2x Monitor 24"

Return to “Orion (200D)”