Hi,
in my Thetis x64 latest release and protocol 2 (2.0b) setup, as soon as I send the 2 tones to linear amplifier, it is making a lot of beeps and on display it writes that I am trying to emit on a not permitted frequency and switches off power (0 W out to antenna).
I tried in 10 and 6 m and same result. I used low power setting and output from 100 to 500 W.
With single tone it is perfect; with two tones and consequent odd IMD signals, the linear amplifier always writes that I am transmitting in a wrong frequency.
I tried with and without feedback from linear amplifier
So it is impossible to use and setup PureSignal 2 with linear amplifier ON.
Any suggestion?
SPE Expert 1.5k V2 issues with dual tone and PureSignal 2 (7000DLE MK2)
Re: SPE Expert 1.5k V2 issues with dual tone and PureSignal 2 (7000DLE MK2)
Sounds like RF in the shack, what is the antenna system, the matcher, feedline and antenna?
Re: SPE Expert 1.5k V2 issues with dual tone and PureSignal 2 (7000DLE MK2)
What kind of amp is it? Acom amps have a known problem with two tone.
Re: SPE Expert 1.5k V2 issues with dual tone and PureSignal 2 (7000DLE MK2)
Scott,
Per the thread title it's a SPE Expert 1.5K V2
Mark
Per the thread title it's a SPE Expert 1.5K V2
Mark
-
- Posts: 115
- Joined: Fri Apr 21, 2017 4:49 pm
Re: SPE Expert 1.5k V2 issues with dual tone and PureSignal 2 (7000DLE MK2)
Hi Mark,
please try Two Tone Test with 700 Hz and the second Tone with 890 Hz.
May be that the Frequency-Counter in the Amp has a Problem with the regular Test.
73 Erwin
Edit: Level at 0.000 db
please try Two Tone Test with 700 Hz and the second Tone with 890 Hz.
May be that the Frequency-Counter in the Amp has a Problem with the regular Test.
73 Erwin
Edit: Level at 0.000 db
Anan 7000DLE MK2 black, P.2 v2.1.18, WIN 10, 10.0.18362 (1903), i7-7700 @3.60 Ghz, 2x Monitor 24"@144 Hz and 1x 32" Monitor @120 FPS for Thetis
Re: SPE Expert 1.5k V2 issues with dual tone and PureSignal 2 (7000DLE MK2)
No problems with my 2kFA. Or my earlier 1.3kFA. Seems a bit odd for sure.
Doug
Doug
Re: SPE Expert 1.5k V2 issues with dual tone and PureSignal 2 (7000DLE MK2)
With 700 and 890 Hz it works perfectly!
Many thanks for suggestion.
Many thanks for suggestion.