"Singing the song of our people"

User avatar
w-u-2-o
Posts: 1235
Joined: Fri Mar 10, 2017 1:47 pm

"Singing the song of our people"

Postby w-u-2-o » Sat Dec 02, 2017 6:06 pm

This came up in another thread and I thought it might have some value here as a separate post...

Although 700 and 1900Hz are the "standard" for official two-tone IMD performance tests, it is by no means necessary or required that to use those tones specifically. I set my two-tone test to run 70 and 190Hz. This provides more than sufficient stimulus for PureSignal to get a solution and to test both PureSignal performance and drive settings on the amp before starting operations.

70 and 190Hz is also quite a bit more pleasant to listen to. That combination does not "sing the song of our people" and immediately mark one as a crazy Apache Labs radio owner :D

73,

Scott
DO2ZA Erwin
Posts: 26
Joined: Fri Apr 21, 2017 4:49 pm

Re: "Singing the song of our people"

Postby DO2ZA Erwin » Mon Dec 04, 2017 5:11 pm

Hi Scott and all others,

for my Acom 600S I take 500 and 696 hz.
The 600S Firmware is blocking the "normal" Frequenzys.
Max. 196 - 197 hz differenz between the Tone are working here.

73 Erwin
User avatar
W1AEX
Posts: 147
Joined: Sun Apr 09, 2017 6:17 pm
Location: Connecticut, USA
Contact:

Re: "Singing the song of our people"

Postby W1AEX » Sun Oct 14, 2018 4:12 pm

I kind of like the natural sounding two-tone (700Hz + 1900Hz ) "Song of Our People" and will tune right to it when I hear it on any band! It helps me to avoid signals like this newest addition to the "Dirty Dozen Hall of IMD Infamy"! The guy displayed in the screenshot below was really popular this morning while jumping around 20 meters to work stations during one of the multiple contests blotting out the band.

Scott, the 70Hz + 190Hz tune has a good beat but it's too slow for me to dance to comfortably.

Rob W1AEX

Image

http://www.w1aex.com/hoi/hall_of_infamy.html
"One thing I am certain of is that there is too much certainty in the world."

Return to “PureSignal Operations”