apache-labs.com

Hi to all,
in my 7000 DLE RX2 not receiving station. By default, RX2 works on ADC2. How do I switch to ADC 1 is all ok. Does the second antenna have to be connected to the second RX on ADC2?
Slavomir

Moved this topic from the firmware sub-forum--not firmware related.

The second ADC is ONLY connected to the RX2/ADC2/RF2 (naming depends on which ANAN hardware you have) connector on the back. If you don't have an antenna connected there you will receive nothing with the second ADC.

See also: https://apache-labs.com/community/viewtopic.php?f=6&t=2644