Page 1 of 1

Anan-10 power meter suddenly off

Posted: Sat Aug 31, 2019 8:21 pm
by WB4AIO Kevin

My Anan-10's displayed forward power reading (OpenHPSDR mRX 3.4.9) is suddenly off.

Instead of reading 8 Watts forward when in tune mode as it normally does, it now reads 18 to 25 Watts depending on the band.

The readings on my Telepost LP-500 external power meter haven't changed; it shows 8 Watts like always.

Another odd thing -- if I reduce the Drive setting to zero, with confirmed zero output using my external wattmeter, the rig's forward power reading now shows 5 Watts.

A database reset had no effect on this problem.

Any ideas?


Re: Anan-10 power meter suddenly off

Posted: Sun Sep 01, 2019 1:26 am
by w-u-2-o
It is suggestive of a hardware failure.