Anan 100D DC plug

g1fxe
Posts: 9
Joined: Fri Feb 19, 2021 6:50 pm

Anan 100D DC plug

Postby g1fxe » Fri Feb 19, 2021 10:54 pm

Like the pinned posting in this forum I have erratic power out which in part appears to stem from the dc lead fuse holder.

As part of the solution I would like to remake the DC lead as I really don't like the zip tied version that was supplied.
BTW my rig is one of the very early grey 100d models supplied direct from the factory.

Does anyone know the model number or a source of the DC plug ?

Thanks, Peter......G1FXE
Last edited by g1fxe on Mon Feb 22, 2021 2:43 pm, edited 1 time in total.
User avatar
w-u-2-o
Posts: 2781
Joined: Fri Mar 10, 2017 1:47 pm

Re: Anna 100D DC plug

Postby w-u-2-o » Sat Feb 20, 2021 1:19 am

I believe this is the correct part:

https://www.molex.com/molex/products/part-detail/crimp_housings/0428160212

That is the body only. Be sure to reference the "mates with/use with" section of that page to reference the mating connector and the crimp terminals that must be installed in the connector body.
g1fxe
Posts: 9
Joined: Fri Feb 19, 2021 6:50 pm

Re: Anna 100D DC plug

Postby g1fxe » Sat Feb 20, 2021 12:23 pm

w-u-2-o wrote:I believe this is the correct part:

https://www.molex.com/molex/products/part-detail/crimp_housings/0428160212

That is the body only. Be sure to reference the "mates with/use with" section of that page to reference the mating connector and the crimp terminals that must be installed in the connector body.


Spot on. When I looked closely at the plug it has a Molex part number (42816) embossed in teeny writing (at least for my old eyes).

Thanks for your help.

Peter.....G1FXE
Attachments
S20210220_0001.jpg
S20210220_0001.jpg (1.28 MiB) Viewed 141 times

Return to “Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.”