FT8, now have birdies on Xmit
Posted: Sat Dec 05, 2020 1:32 pm
I powered off the SDR 2 weeks ago and I used my IC7300 for a couple of weeks. I powered the 7K DLE MKII back on and started up FT8. I immediately noticed the birdies (marked in RED) on my signal. The Green dot is my normal looking signal. I have never had these before on FT8 using PowerSDR, Thetis any version, before. I am using 64 bit 2.8.11 and have had no issues before.
I checked all settings, reset the Database, imported different one's from about month or two ago. Still have what I call birdies, marked in RED.
I've made several FT8 contacts and the station I worked said my signal looked good no issues they could see. I've tried several bands, different antennas and a dumy load, still there.
I have changed nothing at all, hardware or software. The IC7300 is on a separate computer.
Any ideas?
Dave
k4em
I checked all settings, reset the Database, imported different one's from about month or two ago. Still have what I call birdies, marked in RED.
I've made several FT8 contacts and the station I worked said my signal looked good no issues they could see. I've tried several bands, different antennas and a dumy load, still there.
I have changed nothing at all, hardware or software. The IC7300 is on a separate computer.
Any ideas?
Dave
k4em