Hello experts of DDUTIL configuration,
I have been running my 7000 DLE together with my 2000A via CAT+ using Thetis or (formerly) 3.4.9 mRX for a long time.
Now I am experimenting with DDUTIL (Version 3.2.5).
- what are the real settings on ACOM side and in DDUTIL? I cannot configure 1200 Baud in the ACOM setup as described in DDUTIL help....
- I am using a Microham interface providing 2 virtual ports (Eltima). In DDUTIL it seems that I am not able to set any dedicated Baud rate for HPSDR communication. Looking at my Microham URouter diagnostics it seems that DDUTIL is trying to establish a communication with 9600 8 N1. When I set my port to 9600 8N1 I see that there is TX/RX traffic. But DDUTIL does not connect...
any helping comments/ hints will be highly appreciated
TNX and stay healthy
Volker
DL4ZBG/DK0B
ANAN 7000 DLE connecting to ACOM 2000A via DDUTIL
Re: ANAN 7000 DLE connecting to ACOM 2000A via DDUTIL
Hello Volker,
How did you interface the Thetis and Acom2000a via cat+. any help would be accepted. All I am looking for is the Acom 2000a to follow the frequency on vfo A of Thetis. Thanks.
John N2XD
How did you interface the Thetis and Acom2000a via cat+. any help would be accepted. All I am looking for is the Acom 2000a to follow the frequency on vfo A of Thetis. Thanks.
John N2XD
Re: ANAN 7000 DLE connecting to ACOM 2000A via DDUTIL
Hello John,
there might be some settings working well.
I have chosen:
ACOM CAT : Elecraft (38400)
CAT+:
CAT2 : choose your correctly wired hardware COM port, settings 38400 , N, 8, 1 and activate
the power amplifier will follow the VFO A frequency ONLY in "Operate" not in "Standby"
73s
Volker
there might be some settings working well.
I have chosen:
ACOM CAT : Elecraft (38400)
CAT+:
CAT2 : choose your correctly wired hardware COM port, settings 38400 , N, 8, 1 and activate
the power amplifier will follow the VFO A frequency ONLY in "Operate" not in "Standby"
73s
Volker
Re: ANAN 7000 DLE connecting to ACOM 2000A via DDUTIL
Hello Volker,
Which cat connector are you using? The one on the RDU or the one on the back of the amplifier? Thanks.
John N2XD
Which cat connector are you using? The one on the RDU or the one on the back of the amplifier? Thanks.
John N2XD
Re: ANAN 7000 DLE connecting to ACOM 2000A via DDUTIL
RCU, I've sent you a photo per mail!
73
Volker
73
Volker
Re: ANAN 7000 DLE connecting to ACOM 2000A via DDUTIL
Hello Volker,
I meant RCU but my fingers wanted to say RDU for some reason. Thanks again.
73 John N2XD
I meant RCU but my fingers wanted to say RDU for some reason. Thanks again.
73 John N2XD