Anan 10 Amp Keying (Hermes I/O Pinout)

M1AQO
Posts: 23
Joined: Thu Apr 04, 2019 11:57 am

Anan 10 Amp Keying (Hermes I/O Pinout)

Postby M1AQO » Mon Dec 02, 2019 10:25 am

Hi,

I just wanted to ask for confirmation of the pins for Amp Keying on the Hermes board Anan 10 (26 Pin I/O)

Looking at the schematic it shows pin 1 for PTT out and pin 2 for ground.

When converting to an IDC connector according to the Anan 200 manual this flips to pin 26 and 25 respectively.

Therefore on my breakout board I assume I should be connecting to pin 25 and 26 ?

Thanks in advance

Glenn

Return to “Amplifiers & Tuners”