Issue with Behringer XAir12
Posted: Wed Oct 27, 2021 1:28 pm
First off I'm new to the Anan family of radios and SDR. I recently received the 7000 DLE MKII. Blown away is the best description. NR2 is a godsend for someone in a noisy suburban environment. PS-A is an awesome feature that drew me to this radio also. The panadapter shows it all. There is so much I will need to learn about the potential of this rig that I will not be getting bored for sure.
After coming from acheiving an audiophile type satisfaction from using outboard gear with my previous superhet radios I found the Anan to really not need it. The CFC tools can get you there. Hats off to Rob, W1AEX, for his excellent tutorial on setting this up. OK, with all that said on to the main reason for the post.
In the spirit of experimentation I wanted to try out one of my condenser mics with the radio. I am going into the rear line input and using an iBox transformer for balanced>unbalanced as I understand this radio is unbalanced in the rear. I have ferrite clamped down as a station habit. I used the XAir for preamp and only two Fx: Maxer and Exciter. These are modeled on the Aphex Aural Exciter and Optical Big Bottom. Nothing else being used in the Behringer. On the Anan I am using its EQ and CFC. I am close talking into the mic in an acoustically dead room. Monitor is off and I am using headphones. The Problem: I'm getting delay in my audio. This was never a problem using this unit with my other radios.
I would appreciate any knowledgable feedback. Thanks.
After coming from acheiving an audiophile type satisfaction from using outboard gear with my previous superhet radios I found the Anan to really not need it. The CFC tools can get you there. Hats off to Rob, W1AEX, for his excellent tutorial on setting this up. OK, with all that said on to the main reason for the post.
In the spirit of experimentation I wanted to try out one of my condenser mics with the radio. I am going into the rear line input and using an iBox transformer for balanced>unbalanced as I understand this radio is unbalanced in the rear. I have ferrite clamped down as a station habit. I used the XAir for preamp and only two Fx: Maxer and Exciter. These are modeled on the Aphex Aural Exciter and Optical Big Bottom. Nothing else being used in the Behringer. On the Anan I am using its EQ and CFC. I am close talking into the mic in an acoustically dead room. Monitor is off and I am using headphones. The Problem: I'm getting delay in my audio. This was never a problem using this unit with my other radios.
I would appreciate any knowledgable feedback. Thanks.