Hi All,

also this homebrew Sampler work very fine

https://sites.google.com/view/vk1hw/hom ... rf-sampler

Greetings Erwin

Hi,

no problems with the 2tone-Button here.

Hi Rick and all, Running now the new FW 2.1.18. Its all very stable, no Problems with my 7000 DLE MKII with blue Face. One Question: Shows Thetis 21F the correct FW-Version if it was 2.0b ?? I get this Radio used, and i am not shure witch Version was on it. In Thetis 21F i see only 2.0.0 Thanks for ...

Hi Juha,

if you use Thetis 2.8.11 21e ore newer, you have a ticking Box on the Setup/Transmit Card, Highligt TX.. Save Items.
Then you can see what is saved with the TX-Profile

73 Erwin

Hi Ritchie,

yes, you are right, thats a Problem. I use both RX on ADC 0 (DDC 2 and 3).
For now I use the Trick and give both RX 10 dB ATT.
Thanks for that Tip.

73 Erwin

[quote="DL2XY"]Just some Bugs: Thetis v2.8.11 21d6b,ANAN100, WIN7 X64 [list] [*]PSform Button Advance: Black Text on black background. Hi Walter and Ritchie , PS Form Button "Advance is also Ok here, Black Text on White Ground. (d6b) PS works again without Probs. May be my Database wi...

Okay, did a test with RX S-ATT 6 dB, Pure Signal work perfekt, but when back to RX i have higher Noise (goes up with 6 dB) on the Spectrum and on the Audio and 6 dB more on the S-Meter. Without RX ATT this will not happen. This is happend also in 21d3 Edit: in 2.8.11 this was not, when given 6 dB R...

Hi Ritchie, 21d2 is working fine here, TRX and FW see in my Signature. PS is working perfekt here, no Problems with it, picking the Signal with ext. Sampler behind my Amplifier. 73 Erwin Okay, did a test with RX S-ATT 6 dB, Pure Signal work perfekt, but when back to RX i have higher Noise (goes up ...

Yes Ritchie,

I think that is more than ok!


Again, many thanks for your Top-Work.

73 Erwin

Hi Ritchie, 21d2 is working fine here, TRX and FW see in my Signature. PS is working perfekt here, no Problems with it, picking the Signal with ext. Sampler behind my Amplifier. 73 Erwin Okay, did a test with RX S-ATT 6 dB, Pure Signal work perfekt, but when back to RX i have higher Noise (goes up ...

Ritchie, I found a little Bug?? 21d2 If the TX-ATT is on 0, and you press the Tune Button (with PA, full Power) I get adc Overload, the ATT will not coming up. If PS has Set the ATT first, then it is all ok. (extern Sampler) May be sometimes this is a bit dangerus. Ihave seen this also in 21a, but w...

ramdor wrote:Erwin - check you do not have the 15/80m entries locked. If you do nothing gets saved into it if you leave.



Richie.

Hi,

I have testet this with unlocked and lock, will not work here.

Erwin

Hi Ritchie, 21d2 is working fine here, TRX and FW see in my Signature. PS is working perfekt here, no Problems with it, picking the Signal with ext. Sampler behind my Amplifier. 73 Erwin Okay, did a test with RX S-ATT 6 dB, Pure Signal work perfekt, but when back to RX i have higher Noise (goes up ...

Hi Ritchie, 21d2 is working fine here, TRX and FW see in my Signature. PS is working perfekt here, no Problems with it, picking the Signal with ext. Sampler behind my Amplifier. I have a little Prob with the Bandstacks here: On 10m it comes up with saved Zoom, Centerfreq. for the Display. On 15 and ...

I would prefer this one (from Ritchie)


73 Erwin

DL8LAQ wrote:

W9BHI wrote:Richie,
Squelch (SQL) does not work on either RX1or RX2.
The sliders show a change but there is no squelch action on the audio.
Thanks,

No problem here with the squelch in any mode on RX1 and RX2!

Hi,

also no Problems with Squelch here. Edit: Running 64 Bit-Version.

73 Erwin

While we are on the subject of Waterfall. How difficult would it be to add somthing on the console where one could adjust the waterfall intensity? I have been adjusting it on the Setup>Display>RX1 tab. The default High level is -80. During the morning it is necessary to change this to -60 or even -...

Hi Ernst and Ritchie,

here at my Side all is ok, 80 m 3,5 -- 3,8 Mhz, 40 m also 7,000 -- 7,200

Using 21c Prot. 2 EDIT: Region is set to Germany

Greetings

Erwin

Hi Norbert,

you are right with my Setup. Okay that makes sense, but Rx 2 should be identical with RX1 for this Setup.

Erwin

Hallo Ritchie and All, I am not shure if this is a bug, or my Mistake: If I start RX 2 and than give with the RX1 S-ATT say 9 db Att, the Gain-line from RX 1 goes up, but on RX 2 the Gain-Line stays but the Noise/Stations in Panadapter goes down?? Also the S-Meter RX 2 goes down. If I use the RX 2 S...

Norbert,

here it works, may be your Database is defekt, have you make a test with a fresh Database?

Hello Ernst,

thats a really nice Skin, very clear and good Color with good Contrast. Top Job, many thanks for that.

73 Erwin

Hello Norbert,

i have tested this, no Problems here. May be you forgot to press Apply when you make your Changes ??

73 Erwin

Richie, Any advice on what to do/not do if you are seeing bursts of yellow square GetPixel warnings? Thanks, Scott Not really Scott. I think we need to have a chat with Doug/Warren about it. It signifies when GetPixels does not have data to provide for the current frame that needs rendering. When y...

Hello all, installed 21b here, all running smooth (I do not use VAC). With Gradients activatet i have around 6-8 % more CPU-Usage, and the yellow LED is flickert here. With RX2 activatit it is a bit more (I am running at 144 Hz). Without Gradients the yellow LED is also there, but not so often. Edit...

DO2ZA Erwin wrote:Hi all,

here with my 200D if i switch the BPF switch to Bypass (on the Main-GUI), only the HPF is in Bypass, the LPF is still active !
Also bad for the Wideband-Screen.

73 Erwin

Hi All,

new Transceiver here 7000 DLE MK2 BPF Bypass works now as expect, also in Wideband-Window.

73 Erwin

Hi all,

here with my 200D if i switch the BPF switch to Bypass (on the Main-GUI), only the HPF is in Bypass, the LPF is still active !
Also bad for the Wideband-Screen.

73 Erwin

Hi Ritchie, look here: https://apache-labs.com/community/viewtopic.php?f=15&t=2593&p=7708&hilit=acom#p7708 I am not shure, but i think Walter has made a better Solution for his Thetis, i will ask him. and here https://apache-labs.com/community/viewtopic.php?f=20&t=3811&p=14565&am...

Hy Ritchie,

very Nice that you are here again.

Please remember the 2-tone patch for the Acom PAs (Also for Experts)

And your beautiful TX Meter.


73 Erwin

Hi Mark,

please try Two Tone Test with 700 Hz and the second Tone with 890 Hz.
May be that the Frequency-Counter in the Amp has a Problem with the regular Test.

73 Erwin

Edit: Level at 0.000 db