Everything you need to know about Bootloader and the various versions of Programmer is in this topic: https://community.apache-labs.com/viewtopic.php?f=18&t=2333 I prefer to use Bootloader because it always works no matter what firmware you have loaded. NIC priority is a Windows setting and has ...

See this topic: viewtopic.php?f=22&t=4127

Remember that Wi-Fi counts as a NIC, i.e. you can use Wi-Fi for your normal network connection and the Ethernet port for the radio.

Thetis benefits from a lot of cores/threads. Get at least an 8 core (16 thread) CPU. 12 cores would be even better. At equivalent speed/price points the AMD CPUs generally offer more cores. If I was building new I'd be getting a Ryzen 9 with 12 or 16 cores. Memory requirements are driven by Windows ...

It's the same list no matter what input is selected: mic, line, VAC, cmASIO.

-65 dB is too much. The -55 dB of the VK unit is perfect at the legal limit.

The other thread should answer your question.

Would the 1/8" TRS 'Line In' be a better choice, due to the high gain mic pre on the XLR input? Hard to say. You'll have to try it. As I already wrote, a lot of people have had trouble using the G2 balanced input even with just a microphone by itself. 1) What is the simplest way to 'bridge' my...

Why would you suggest analog through CAT? Not doubting your knowledge, just wondering. IMHO, MIDI is a lot of extra processing in order to form the required MIDI messages. Click a button or turn a knob one increment and puke out the appropriate CAT message seems simpler to me, especially if I was c...

For line in see here: https://www.w1aex.com/anan/anan.html#audio_chain The G2 has a balanced input on the rear. I don't have a G2 but I believe that connector is a 1/4" TRS jack. People have had all manner of difficulty trying to use that input but theoretically it is the obvious way to go. One...

AFAIK the Purge Buffers option only affects the spectral display and not any audio.

This problem occurs even without external source of latency like Voicemeeter. The problem is that the Thetis TX audio pipeline is not flushed prior to the start of the transmission. This problem can be mitigated by setting General > Options > Options-1 > RF Delay to an appropriate value. I've never ...

There will be no conflicts. Internal Thetis logic is "last command wins".

You might consider processing the analog controls into CAT rather than MIDI.

Note also that Thetis can accept CAT over IP as well as serial.

K5WC wrote:It would be nice if we had a pinned post in the G2 section about software and firmware updates was posted.

Like this one: viewtopic.php?f=48&t=4772 ?

A quick post to the bottom of that one by one of you G2 folks might be all that is necessary.

That will work fine.

See also this large thread on GPSDO use: viewtopic.php?f=17&t=2499

Power cycling the ANAN hardware to fix a problem indicates that the firmware went to a bad place and needed to be rebooted.

Very detailed instructions for using Bootloader are here:

viewtopic.php?f=18&t=2333

You must follow them very precisely lest you run into problems.

Loading firmware with the bootloader is the "hard reset". Step 1 is to go back to the original firmware and make sure everything is working OK. If that does not work then that suggests you are not performing the firmware loading process correctly. If it does work, then you can retry one of...

Did you use the right firmware? What FPGA is inside your 7000 (you can tell by what version firmware was in their before)? See these links for reference: https://community.apache-labs.com/viewtopic.php?f=32&t=4462 https://community.apache-labs.com/viewtopic.php?f=32&t=4972 Assuming you did l...

Recently there was a question about building the installer and getting an .msi file. Here's the process I used... If you look in the VS Solution Explorer pane, you'll see an element called Thetis-Installer. When you build the entire solution at the top level, if you've got the right dependencies ins...

Two NICs? Try disabling the NIC you don't need prior to running Bootloader (Settings > Network & Internet > Change adapter options, right click on the adapter in question). You won't break anything by doing this, you can simply enable it again when you are done.

I just istalled Firmware 2 12.2.1A in my 100D first edition. Now I have "sequence error 264 / 265 (DDC2 Mic)" and an distordet audio. Database reset has no effect. Any idea? Yes. Unfortunately that firmware version is not closing timing on your hardware. You will have to petition Rick for...

I've recently started using CMaudio with a Behringer UMC202HD and ASIO driver. I also know that I no longer have cw sidetone. Could this CW mode info not being sent to Log4OM be a side effect of CMaudio? No, it's not a side effect of CMaudio. There is no CW sidetone available when VAC or CMaudio is...

Disclaimer: I don't use Log4OM. TCI is not 100% implemented in Thetis. Try using the network hamlib method instead. See page 23 in the Log4OM manual and also this link: https://community.apache-labs.com/viewtopic.php?f=22&t=4249&p=28188 If Log4OM is built using the latest version of hamlib y...

Would it be a good idea to install this new firmware for my 8000DLE even if I don't do CW? I haven't encountered any of the problems mentioned on Github. But, since I only use phone, I don't know if the problem would cause problems with other modes and possibly do some damage to my radio. James WD5...

So what's different about 2.2.2b? In this case it's just two different compiles of the same code. The problem with the free Quartus Lite FPGA development environment is that it is impossible to lock down the timing (aka incremental build, aka floor planning). So every compile results in slightly di...

It's definitely working. Steve K1GMM had a RACK rack connected to audio devices and sent the signal to Thetis via the audio card via Banana. In the audio tab he selected Asio - virtual cable. There are videos on YT. But not everything is understandable to me. Sławomir If you've got Thetis and Voice...

Have you got Thetis to work with Voicemeeter? That is the first, necessary step.

The links to the FW with the RF burst fix are located here: viewtopic.php?f=32&t=4972

I believe those will also have the PLL fix.

Here is an example of what Mark is talking about. What DAW are you using?