seems to be caused by mouse pointer entering the tool tip, causing mouse leave event on the icon, closing the tooltip, and then it cycles. Just have to live with it for now as I don't really have plans to re-write Microsoft's tool tip system :D This can also be seen if you move/expand the console wi...

Installed pre release 5 and noticed that if you hold the mouse over CM indicator logo the pop up info message flashes on/off. Anyone else seeing this ? CAT TCP enabled message next to it works ok. this happens with some/all status bar tool tip text afaik, some external program perhaps interacting w...

a long time ago in 2.9.0.8, but it doesn't need to be used, like so many other things. There has always been an option to offset the NF calculation, aka Shift in options 2, which is all that button does, to obtain 0dB snr. The estimated NF calcs are dependant on width shown in the view, fft size, de...

Just tested it here and made a quick vid.

https://www.youtube.com/watch?v=eaCW_Z_syic

w9mdb wrote:In File/Settings/Advanced make sure you do NOT have Tone Spacing X2 or X4 checked.

yeah that is probably it Mike ! the audio does seem to be 100+hz of bandwidth

that looks fine. Perhaps switch on DUP and see what the TX is like. Also use MON to 'hear' if it sounds ok. Only other thing is perhaps for some reason it is off frequency and outside the rx width of other stations?

audio levels into thetis ok? what is the mic meter saying when it txs?

I checked VK5MN and whist rx'ing ok, no signals received by other stations for VK5MN

edit: I assume the 6w is getting out

When I was looking into this and coding up the adjustment controls I used an ammeter to get the current values for idle/rx, and then from 0w in 10w increments up to the max of my 7000dle. I then tweaked the offset and sensitivity values until the readings in Thetis closely matched. See attached pdf ...

@Slawomir watch this

https://youtu.be/1LzOfLJYQCg?si=nhr57oM227BqjrlI&t=158

updated to pre-release-5 and hopefully the last pre-release

n2gq wrote:Yes, just the day before I updated the Radeon drivers.

was it an issue before you updated them?

Okay on it's way. Sadly nothing of relevance in the errorlog.txt file. I ran up your db and spent about 5 mins slamming the splitter bar from top to bottom, dragging the splitter bar, and no issue. If you can get it to repeatedly happen on demand, try closing down all other programs and clearing ou...

n2gq wrote:When using panafall and I try to expand the waterfall all the way up Thetis exits. Also happened once when scrolling the frequency bar on top of spectrum display.

can you send me this zip. My email is over on qrz. Cheers.

If I Tx using my CMD-PL1 midi controller mapped key, I get the popup warning window, I close the window, and Thetis powers off. The Thetis power button goes off. I have to press power again in Thetis to continue. The code turns off the radio if a cat based ptt/mox fails (midi uses cat functions/cal...

K1LSB wrote:Where was there any notice of a new 2.10.3.5 pre-release 4 posted?

there wasn't one this time Mark

Tony EI7BMB wrote:Anyone notice that NB stays on during TX ?

It turns off during TX only if DUP is on

@ea3aqr yeah, the adc overloads did worry me somewhat. It is quite crude at the moment, just setting max att even if output slider moves by 1, but it was the easiest/quickest to implement. May add some more finesse at some point where it only happens if power increase is over some threshold. Trouble...

any sightings of the man in red?

updated to pre-release-3 to fix a small startup crash/issue

updated to pre-release-2. please test. Thanks.

working on this issue atm, removing links until fixed

Hi all, Thetis v2.10.3.5 final release is out here : https://github.com/ramdor/Thetis/releases Overview video : https://youtu.be/aTvEznU2fY8?si=I9vJ1bnUVAPN0lEO Note: since release of the final there has been a fix for the following, and will show u1/u2 in the titlebar. u2 is most up to date -u1 - 6...

How about the vinyl mode does it change the way the jog wheel behaves? It might take away the secondary function. They didn't when i just tested it. To get any jog data out of those wheels they need a finger on top to be 'touching'. Incidentally there is a touch midi message for those which I scrap...

Update: I am finding that after programming a wheel I will still need to keep my finger in the "yellow" area when using it to control the radio. Is this the way it is supposed to work? I thought that one needs to place the finger in that yellow area only when doing the programming but sho...

@juha also, something VERY important with the hercules dj starlight. You need to spin the wheels with your finger on top. It does not give any midi messages if you use the outer plastic bezel. If your finger is half on/half off the top wheel surface you might get intermittent mdi messages and odd th...

@juha

It is very simple thing to do

https://youtu.be/hH8_Y52eYKc

note: Keep in mind if you have any external software that is doing things to the frequency, then you might end up with a fight on your hands

could try adding an entry to the hosts file, other than that I am not sure. I will add some error/log message in next release perhaps. An entry like the following into your hosts file which should be in C:\Windows\System32\drivers\etc (you will need admin perms to update that file) : 185.199.111.133...

tried flushdns ? and/or shutting down/restarting thetis?

edit: also, try a reboot

Thetis uses the following URL to obtain the skin server list https://raw.githubusercontent.com/ramdor/Thetis/master/skin_servers.json If you are unable to view that url as you say 'This site can’t be reached' then it is blocked at your end by your ISP, and there is not much I can do about that. EDIT...