Hi Scott and all Others,
2.8.7 and 2.8.8 are running very good, no problems, Setup is running good 32-bit and 64 bit. System is Win 10 Home.
Database is copied from 3.7.0a3, no problem find at this Time.
Very good Work, many thanks to all.
73 Erwin
Search found 115 matches
- Mon Oct 12, 2020 4:52 pm
- Forum: Thetis
- Topic: Thetis 2.8.11 Released!
- Replies: 232
- Views: 238780
- Mon May 11, 2020 4:06 pm
- Forum: Thetis
- Topic: Display problems
- Replies: 8
- Views: 5599
Re: Display problems
Hi Scott,
yes, i must read slower
Erwin
yes, i must read slower
Erwin
- Mon May 11, 2020 3:33 pm
- Forum: Thetis
- Topic: Display problems
- Replies: 8
- Views: 5599
Re: Display problems
Hi Buck,
for the Gain-Line go to Setup-DSP-AGC/ALC on the right half mark Display RX2 Gain Line and Hang Line.
DEXP is the TX-Noisegate, it is only on the Main Gui (RX1)
For marking PSA and VAC, i think you must save it with the TX-Profil
73 Erwin
for the Gain-Line go to Setup-DSP-AGC/ALC on the right half mark Display RX2 Gain Line and Hang Line.
DEXP is the TX-Noisegate, it is only on the Main Gui (RX1)
For marking PSA and VAC, i think you must save it with the TX-Profil
73 Erwin
Re: 2.6.9
John,
take a look at my post 5 or 6 up, and the answer from Gary, may be it is the same Problem at your Side ??
take a look at my post 5 or 6 up, and the answer from Gary, may be it is the same Problem at your Side ??
Re: 2.6.9
Helmut,
I testet just the Spacebar for PTT, i must mark on General-Option 1: Keybord... Enable Shortcuts
Without this the Spacebar will not work.
edith: this Box was def. checked in previus Versions.
Erwin
I testet just the Spacebar for PTT, i must mark on General-Option 1: Keybord... Enable Shortcuts
Without this the Spacebar will not work.
edith: this Box was def. checked in previus Versions.
Erwin
Re: 2.6.9
Hi Gary,
yes, now it works, there was 4 Entrys from Thetis....
Right-Klick works now also.
Many thanks and 73
Erwin
yes, now it works, there was 4 Entrys from Thetis....
Right-Klick works now also.
Many thanks and 73
Erwin
Re: 2.6.9
Hallo to all,
not shure, but i think something is not ok with my Thetis 2.6.9.0. I have installed with 2.6.9.0 setup 25Jan20.msi
I still see Thetis 2.6.9 (1/4/20) MW0LGE (c3) is that ok so????
Also i miss the right-klick funktion here???
Any suggestions???
73 Erwin
not shure, but i think something is not ok with my Thetis 2.6.9.0. I have installed with 2.6.9.0 setup 25Jan20.msi
I still see Thetis 2.6.9 (1/4/20) MW0LGE (c3) is that ok so????
Also i miss the right-klick funktion here???
Any suggestions???
73 Erwin
Re: 2.6.9
Hi All,
My 200D Rev. 24, FW 1.8, Thetis 2.6.9 b6 (installed from MSI-File) works perfekt here, no Problems with Setup/saving/add.
Good Work, many, many thanks.
73 Erwin
My 200D Rev. 24, FW 1.8, Thetis 2.6.9 b6 (installed from MSI-File) works perfekt here, no Problems with Setup/saving/add.
Good Work, many, many thanks.
73 Erwin
Re: 2.6.9
Hi all and Ritchie, at first 2.6.9 b2 is running perfekt here, many thanks !! Right Click on CPU in Status-Bar ?? No funktion here?? Sometimes I have a problem to save my Setting in the Database, here it is on DSP - Options, the Filter-Type. Sometimes it is saved, some time not?? (B1 Version). 73 E...
Re: 2.6.9
Hi all and Ritchie, at first 2.6.9 b2 is running perfekt here, many thanks !! Right Click on CPU in Status-Bar ?? No funktion here?? Sometimes I have a problem to save my Setting in the Database, here it is on DSP - Options, the Filter-Type. Sometimes it is saved, some time not?? (B1 Version). 73 Er...
- Fri Nov 08, 2019 7:16 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Hermes (Anan10/100) Problem with PureSignal
- Replies: 7
- Views: 9039
Re: Hermes (Anan10/100) Problem with PureSignal
sorry, wrong threat.
Re: 2.6.8
Hi Riche, all works very fine here with E2. Very nice work from your Side !! Only one very little Problem: After start Thetis E2 my Mic-Audio was gone to only -20 or -25 dbm in the Mic-Meter, switch the 20db Mic-Boost off and on does nothing change. Restart E2 dos nothing change, i think the 20 db B...
Re: 2.6.8
Hi all and Ritchie, Sorry forget it: Version is now d4-2 I get also the Error on the WB Display, if I make the Window bigger no Problem, but if I make it much smaller it chrashed with this Window when I minimized the WB Display: WB Error.JPG It is a long Text, so here only the little Pic. When I cli...
Re: 2.6.8
Hi Ritchie,
D4 i get the same Error.
D4-1 (first version) works great for mey, also on 160m no Problems, PS is also working very good with AutoATT.
Great Job, many, many thanks!!
73 Erwin
D4 i get the same Error.
D4-1 (first version) works great for mey, also on 160m no Problems, PS is also working very good with AutoATT.
Great Job, many, many thanks!!
73 Erwin
Re: 2.6.8
hi All, i wrote this again, my anan is connected with a seperate nic, an i have disablad all energie option and shut down do another network as 1 gb for all time, i have no problems here, my by this is a problem with the windows energie managment ??? edit: i run thetis 2.6.8 d3, its running perfect ...
Re: 2.6.8
Hi All,
Network-Dog is all the time on, but I have all Energie-Managment for my NIC disabled, it runs at full power, only 1 Gig no throttle,
all Energie-Saving disabled.
May be thats better???
73 Erwin
Network-Dog is all the time on, but I have all Energie-Managment for my NIC disabled, it runs at full power, only 1 Gig no throttle,
all Energie-Saving disabled.
May be thats better???
73 Erwin
- Thu Oct 17, 2019 4:18 pm
- Forum: Thetis
- Topic: Thetis 2.6.8 and which version of Firmware
- Replies: 8
- Views: 6933
Re: Thetis 2.6.8 and which version of Firmware
Rob,
yes, 192k is quit good, but after some time I like the 384k!!
Btw: just take a look, my PS is perfekt also on 10 m when the 200D is cold.
73 Erwin
yes, 192k is quit good, but after some time I like the 384k!!
Btw: just take a look, my PS is perfekt also on 10 m when the 200D is cold.
73 Erwin
- Thu Oct 17, 2019 4:03 pm
- Forum: Thetis
- Topic: Thetis 2.6.8 and which version of Firmware
- Replies: 8
- Views: 6933
Re: Thetis 2.6.8 and which version of Firmware
Hi Rob,
have you tried 384k Samplerate? I remember I was at the first Days with 1.8 FW and Thetis 2.6.8 c..... on 192K and have Problems with PS.
After change to 384K it was nearly perfekt (with Auto ATT), since I am no more use the Auto ATT in PS it is run very nice here.
73 Erwin
have you tried 384k Samplerate? I remember I was at the first Days with 1.8 FW and Thetis 2.6.8 c..... on 192K and have Problems with PS.
After change to 384K it was nearly perfekt (with Auto ATT), since I am no more use the Auto ATT in PS it is run very nice here.
73 Erwin
Re: 2.6.8
Hello Guys,
i am using an Anan 200D fw 1.8 and Thetis 2.6.8 c5.
I have to switch off the Auto-ATT on Linearity/Advanced Window. I use a fixed ATT, Setup/General/ANT/Filters.
With Auto-ATT on, PS crash here after a few Minutes TX.
73 Erwin
i am using an Anan 200D fw 1.8 and Thetis 2.6.8 c5.
I have to switch off the Auto-ATT on Linearity/Advanced Window. I use a fixed ATT, Setup/General/ANT/Filters.
With Auto-ATT on, PS crash here after a few Minutes TX.
73 Erwin
Re: 2.6.8
Hi Richie, this is for DE (IARU Region1) 135,7--137,8 khz 472--479 khz 1810--2000 khz 3500--3800 khz 5351,5--5366,5 khz 7000--7200 khz 10100--10150 khz 14000--14350 khz 18068--18168 khz 21000--21450 khz 24890--24990 khz 28000--29700 khz 50000--51000 khz (in DL TX only 50000 up to 51000 Khz) 144000--...
Re: 2.6.8
Hi all and Ritchie, I tested again Puresignal, works very good, but when I switch on the Auto-ATT in the PS 2 advanced Panel it seems PS get worry and do not correct anymore, also after tick Auto-ATT to OFF the Tune-Function gets worry also, I get many Tune-Signal on both Sides of the Filter. Only w...
Re: 2.6.8
Hallo all, I have installed 2.6.8 c4-b, work very nice, without problems. Found a little Bug???? not shure: The Zoom-Factor in RX1 and RX2 ist not identical, i mean the Zoom is doubelt in RX2. I am runnig RX1 at 384000 and RX2 at 192000, is that the Problem? UPDATE: Yes, if both RX are at 384000 Sam...
Re: 2.6.8
Good Morning all, Ritchie: Thetis is running very good here, Anan 200D Board Rev.24. This is a very good, TOP Work from You !!!! BTW: is it possible to put a little Patch into Thetis, to make work PAs like Acoms with Frequency-Counter, with the 2-tone?? Please take a look at this Thread: https://apa...
Re: 2.6.8
Richie,
I changed the Key to "False", Thetis is running again.
Thank you
73 Erwin
I changed the Key to "False", Thetis is running again.
Thank you
73 Erwin
Re: 2.6.8
Hi Richie, thanks for coming back. I was not shure but I thinks also it was this little Box, I have ticket!!!!!!!! AAAAHHHHH, stop, I have put a big part of my Setting in, make a restart now: the same again, but the Box, I think, was not checkt, I take a look in the data and tell you. And by the way...
Re: 2.6.8
Hi Rob, thanks for coming back, my text Scaling is still at 100%. I have killed the Database, its running again, but Pur Signal is not perfekt, sometimes it corrects, sometime not. When I disable the Auto Attenuator, it is better. I must test this, but for now I must put in my settings. Thank you 73...
Re: 2.6.8
I am not shure, but maybe a mistake by myself: 1. switch off thetis 2. shutdown thetis 3. switch off the Anan an than.... 4. start thetis an get the error then thetis is shut down, I switch the Anan on, start Thetis and get the error again. Can I try to install Thetis again??? Or is the Database bro...
Re: 2.6.8
Hello all, Great Work on Thetis, many thanks !! I installed today Thetis 2.6.8, it worked good here, TRX is Anan 200D vers.24. After i put all my Settings by hand in, I test Puresignal but it will not work very well. I shut down Thetis, switch Anan off and on, but when try to start Thetis i get this...
- Mon Jun 24, 2019 4:12 pm
- Forum: Amplifiers & Tuners
- Topic: Anan 200D and Acom 600 S
- Replies: 10
- Views: 14767
Re: Anan 200D and Acom 600 S
Hello all and Scott,
a good Friend has make a Patch for this Problem (for PSDR 3.4.9). He begins with One Tone and then 0,1(0,2) Sek. later the second Tone.
It works perfekt here and also with the Acom 1200 S. .
Many thanks to Walter.
73 Erwin
a good Friend has make a Patch for this Problem (for PSDR 3.4.9). He begins with One Tone and then 0,1(0,2) Sek. later the second Tone.
It works perfekt here and also with the Acom 1200 S. .
Many thanks to Walter.
73 Erwin
- Sat May 26, 2018 7:06 pm
- Forum: Digital ("Virtual") Audio
- Topic: VAC fails, need Help (solved)
- Replies: 4
- Views: 8270
Re: VAC fails, need Help (solved)
Hello Scott, What the F..... is that ???? Never had I find this, never, worked for more than 10 hours on it. I have switch on in the Privacy and all is working again. Many thanks for that Tip!!!! I have search the Forum but did not find this Tip, are I am the only with this Problem? Thanks again, Gr...