When you don't get a spectral display or receive data on a particular computer it is always because of a firewall issue, so I'm stumped. You might consider upgrading to the latest P2 firmware: https://community.apache-labs.com/viewtopic.php?f=32&t=4462 I'm assuming you are running the latest The...

What version of firmware are you running on the 7000? Specific version number, the first line you see in the firmware section in Setup > General > H/W Select.

If it's truly wired as discussed, then the only thing I have left to offer is that if you've got the mic PTT button wired up, then unwire it from the TRS connector and see if that fixes the problem.

Yes the cable is custom and the gm4 is 4 pin xlr with pin 4 being ptt 1,2,3 being standard. I read here and heil in bridging pin 1 and 3. I am using ptt at rear of radio via foot switch. Originally when I noticed the click in the element mic+ was on tip and ptt on ring. I flipped the two but still ...

Hey thanks to all for ANY work done and advice. I'm doing very well just off the starting line. I'm stuck between two and three on your list Scott. IN VS, I cloned the URL https://github.com/ramdor/Thetis-2.9.0 . The result is a column on the right. I get the resulting page: Where do I find the nex...

W3MMR wrote:Too friggin cool.

You need to turn on NR2

Also, the peak hold stuff in your video on tx is getting disrupted by vox unkeying/keying between words. There is an ignore time when tx<>rx/bandchange happens before peak/history is gathered, and at the moment this is around 2 seconds. The reason being is that WDSP needs to settle and would otherw...

Does it still work OK on whatever the old PC was?

Also: check your firewall settings. First try disabling the Windows firewall on the new laptop. If that works, then enable it and go to Thetis > Setup > General > H/W Select and use the "Firewall Check" button.

Great news!

It's always shocking how many dishonest hams there are. You would think our hobby would attract a better class of citizen, but that's been proven far from true many times.

Doug is the man!

I am using a Heil gm4 dynamic mic. The mic signal is connected to the tip and selected in menu. Bias off and ptt is on I use a foot switch. Good info! How is the footswitch connected to the ANAN? When I activate ptt with mox icon I don't get the click in the element. Exactly. Because when you use M...

This sounds like it might be a mic and PTT wiring problem. This happens all the time with new users because they don't pay full attention to the proper wiring of the mic TRS connector. What microphone, and exactly how is it wired? How are you activating PTT, and exactly how is that wired? In setup, ...

n2gq wrote:I am going to try a PS test today. Hopefully if I get time. Are any of you guys operating with a new mk3 chip and had any success?

Jay n2gq

Jay--AFAIK, you are the only person with the most recent FPGA that has reported an intractable problem with a GigE connection.

I built the latest that was posted yesterday. At least I think I did, I'm not fully up to speed on pulling down Git updates, etc. Hi Scott, How difficult was the bar graph meter update? While we await a full installer version, do you have any tips to share or care to offer step-by-step instructions...

From your description there is no way to know what might be wrong with your 100D. It could be a problem with the hardware, software or firmware. It could be a problem with some other part of your station. It could be operator error. Did it ever work right? When did the problem start? Did anything ch...

K1LSB wrote:You don't need an external sampler to test for proper PS operation, you can just use the internal sampler:

Gen Ant-Filters Antenna.jpg
Mark

Unless he's using an external amplifier...

I built the latest that was posted yesterday. At least I think I did, I'm not fully up to speed on pulling down Git updates, etc. I spent a lot of time playing with the new metering to get it just the way I wanted it (so far) and posted the results here: https://youtu.be/GFBSdHe8jNc I'm not at all i...

Juha--you are the KING of asking a large number of totally disconnected questions in a single post! To address the title of this post, "Compression taking place", and, I'm assuming, your primary, core question: PureSignal has NOTHING to do with the compression you see with your amplifier. ...

Okay this is what I did and the sequence errors have gone away. I went into tp-link network card properties and disabled most of the parameters that were enable. It would probably be better to leave all the off-loading options turned on. That makes things easier on the NIC. Now what actually helped...

Andromeda runs Thetis and is not related to the piHPSDR software that runs the Controller in this way.

You are already doing everything in the cookbook. The only thing I have left to offer is to try messing with some of the advanced settings. Over the years I've found that the advanced settings that have had the most dramatic effects for me were flow control and interrupt moderation. For instance, on...

As it happens, there will be another P2 firmware version coming out for EP4CE and 5CEFA based hardware because a bug was found in the QSK code in the current builds. So that might (or might not!) fix any problems. When the new firmware will be available I cannot say. It has to go through some alpha ...

It doesn't work perfectly, it gets stuck at the end of the word. Unfortunately that's not enough to understand the problem. What gets stuck? Are you saying it does not stop transmitting? Or does it stop transmitting too soon like you wrote in your posts from May? A lot more detail than that would b...

Are the seq errors resulting in any noticeable degradation of your transmit audio? If not then you can ignore them. Public/private doesn't really matter. In Thetis Setup > General > H/W Select have you enabled Network Throttle Index Tweak? You can try disabling Windows Firewall on the dedicated TP-L...

cat control is ok wit ANAN7000 to N1MM log, But i can not transmit contest wav files on the air. Please any help about it? do we need any extra vac program? You asked this same question back in May 2022, got your answer, and said it was working. https://community.apache-labs.com/viewtopic.php?f=16&...

If you are using a 144Hz display, then what happens when you set your frame rate to 144Hz in Thetis and also turn on VSync?

There is currently no way to have independent zoom.

More to the point, did you find out what setting was not the same between RX1 and RX2?

Wow, Rick, thanks so much for the quick reaction! It's pretty surprising that nobody noticed/complained with the EP4CE firmware because that's been out there quite some time!

What you describe is impossible if both RX1 and RX2 are set up exactly the same and are both feeding off of the same ADC.

You need to make sure that AGC mode, AGC gain, NR modes, passband width, filter settings, everything is exactly the same.

It would be good if others with hardware based on the more recent board revisions could check this. It could be a firmware issue that crept in with the advent of the EP4CE and 5CEFA FPGA builds. Refer to this post to identify what hardware you have: https://community.apache-labs.com/viewtopic.php?f=...

Uninstall. Delete everything in this folder: C:\Users\your-windows-username-goes-here\AppData\Roaming\OpenHPSDR\ Note that this is a hidden directory but if you type the path in manually in File Explorer it will open the directory. Then reinstall. Thetis won't really do very much without some hardwa...