Great, tnx working fine.

wa1oxt / / gary

Tnx Richie , your the best.

enjoy

gary / wa1oxt

Richie...
If your looking for homework..
CTUNE has no effect in Panascope mode.

Tnx

gary / wa1oxt

Anan 100d
Thetis 2,6,9
Fw ver. 12.1pre2.5550.rbf

Tnx Richie.
The Record/Playback feature works great here , also with VOX !!!
The Anan is located elsewhere on my LAN so in the station is just the Mic and Dj Console.
It's great to have that feature operating agn.
Tnx agn for your support.

garyradio / wa1oxt

Ok, I 'll figure out the issue with the Rec / Playback. More interesting is that Playback does't work on start-up ie: try this... Bring up Thetis , push the Playback button...nothing happens ! If you select MOX and then select Playback..nothing happens with Playback I had to check to see if indeed t...

Request....
Is it possible to have a vertical gain adjustment included within the "Scope" and "Scope2" feature on the main gui ?
Also , does anyone have a clue how to get the playback feature working when in VAC ?

tnx
garyradio / wa1oxt

Richie , you have the same problem I have.
I never had any luck with the playback feature in Thetis....
Always worked with P1 and MRX.

Nice feature to have , kind of miss it.

Turn your power down to zero watts output to test it.

garyradio / wa1oxt

Please ignore my last post.
Problem solved with a reboot of software.

tnx oxt

I seem to have a level issue with the 2tone test.
Anybody else ?

garyradio//wa1oxt

Ah.......... Richie , all the Anan motherboards are crying for a combo VNA and SA software. Matter of fact , the SA part is almost done.
Maybe Apache Labs should think abt that T&M market.

Great Job Richie.

wa1oxt / / garyradio

WOW , so much fun Richie.
Look's great.
What's next ......a 3D Waterfall ?

tnx.

wa1oxt / /garyradio

Your the BEST Richie !!!
I was afraid to ask for to much. Although I figured you would catch on .

tnx

gary / / Wa1oxtRadio

Great Job Richie .
Now for uV readout !

Tnx

gary / / wa1oxt

Very interesting Rob , also a great read !

gary /oxt

Another great job !

Tnx Richie

wa1oxt / / gary

Super.

oxt

The up/dwn control setps 10dBm per mouse click.

oxt

Is it possible to have the Waterfall step feature in RX1/Rx2 and Tx (General>Display ) to step in 1 dBm instead of 10dBm ?

gary

Great answer LOL.

oxt

Wow... that was quick !!!

Great job on d6-1.

Thank's Rich

wa1oxt / / garyradio

Yes, that worked .

Thank You

wa1oxt / / garyradio

Will sent DB.
Other issues here , give me a few hr's

tnx , oxt

Spoke to soon.

2.6.8 resent D4.
when 160 meter band selected , software halts and gives an array error.
Upon next load of Thetis , software fail's to load.
please see attached.

oxt

2.6.8

D4 loading issue fixed.


Thank you , works fine.

Enjoy the wkend.

73,

wa1oxt

gary

2.6.8

D4 loading issue....

see attached.

any inputs ?

oxt.

Great job guy's...the meter is great , now I can see it across the room.
For some reason the software lost the feature of "Show CT H Line" .
It's under Setup/General/Options , Miscellaneous .
Any input ?
oxt

Anan 100D SDR Project. Thetis SW 2.6.7 FW PC2 _v12.1_pre2_5550.rbf. Anybody catch this error ? 1. While in Xmit , mouse cross hair readout is incorrect approx 1/2 of filter size ( lower left ) on main GUI . 2. Xmit click / drag feature works , but it's also incorrect. Example : While in Xmit do the ...

Anan 100D SDR Project. Thetis SW 2.6.7 FW PC2 _v12.1_pre2_5550.rbf. Regarding my earlier post. Problem 2 : Intermittent crash of entire system. This only happens when going into Xmit (on first key up) , never during Xmit and never while in Rx. Windows 10 screen reports an error , collects informatio...

Anan 100D SDR Project. Thetis SW 2.6.7 FW PC2 _v12.1_pre2_5550.rbf. From my last post.... Problem 1 : Intermittent return to RX after Xmit . Have to cycle Tx/Rx a few times. Observed this on 160 - 10 mtrs. Action: Have to confirm if the cause is a faulty / lazy Tx/RX relay (hardware) . Problem 1 sol...

Anan 100D SDR Project. Thetis SW 2.6.7 FW PC2 _v12.1_pre2_5550.rbf. Problem 1 : Intermittent return to RX after Xmit . Have to cycle Tx/Rx a few times. Observed this on 160 - 10 mtrs. Action: Have to confirm if the cause is a faulty / lazy Tx/RX relay (hardware) . Problem 2 : Intermittent crash of e...