Further research on the topic clarifies that NR2 is most definitely NOT spectral subtraction. Spectral subtractive algorithms are probably the simplest class of algorithms one might implement in the frequency domain, by far. While superior to time domain algorithms like LMS (least mean square, defi...

I assume that because my 80m Dipole had a large capture area, it worked adequately for my purpose. Is this a reasonable assumption? No. The reality is you simply got lucky. Since "diversity" in this context = beamforming, you were very luckily able to form a beam in the direction of the s...

It's not clear that both Thetis (WDSP) and SDR Console use the same methods. If you take a look at this topic: https://apache-labs.com/community/viewtopic.php?f=9&t=4018& Listen to Warren's discussion starting at about minute 13 in the video, and also review the two papers Warren cites (atta...

Yes I know, I was playing with ncat just before Ernst released his tool. My idea was togle PTT using just one CAT command, but unfortunately I didn't found a command to do that. Yes, that's typical of the entire command structure. Two different commands for enable and disable of any function. Lucki...

Although I cautioned folks about this in my post on 5 May (see above), people have continued to use this particular topic as a one would a mail reflector. Therefore, until Richie returns to active development, I am temporarily locking this topic. Use the forum as it is intended, please. This is to t...

In addition to Ernst's fine work, you can also use ncat.

Should we move this discussion to the "Macro & MIDI Controller Software, Hardware & Scripts" sub-forum or leave it here?

Is that working a lot better and more naturally for you? No need to shout, BTW. You might consider editing the ALL CAPS in your posts back to upper and lower case. Just curious: have you considered adding a serial port PTT switch, or a MIDI controller, to achieve focus-less control of the radio? And...

Hi, Since I upgraded Thetis from 21K9 to v2.9.0.6, on all higher bands (17/15/12/10 meters) I see lot of spurs across the spectrum and "ADC overload" indicator keeps flashing while I increase the drive slider to Max 100. Reducing the drive slider would clear up the things. I even tried re...

That really is what ham radio is all about! Great job on the modification!

Jordi,

Will this also return focus to the Window you were in after sending the space character, or does it leave focus with Thetis?

73,

Scott

Happy to report success using that Ethernet USB adapter. Not an ideal solution but it works, especially once the Interface Metric was changed to a value of 1. Why is it not an ideal solution? What would be an ideal solution for you? Setting up VACs and other things are proving very difficult. Some ...

oe3ide wrote:

w-u-2-o wrote:Very handy, Ernst!

Would the source code be available for download?

73,

Scott

Sure
https://github.com/oe3ide/ThetisIPCat

73 Ernst

Thanks Ernst!

Ernst has a new tool out:

viewtopic.php?f=16&t=4198&p=20371#p20371

I thought it worth a cross-post over here for all you Stream Deck and the like folks, on the off chance you didn't see it.

Very handy, Ernst!

Would the source code be available for download?

73,

Scott

I've never heard anyone bad mouth Lenovo any worse than HP or Dell or any other major brand. IMHO, the assertion that Lenovo, or any other brand of PC, is a poor choice for anything just on the basis of its brand is a bad one. With very rare exceptions associated with bad/unreliable hardware, I don'...

Just got my 200D and spent a frustrating weekend trying to connect to it. Mainly I was not familiar with setting up even the most basic networking settings, but also 1) not a single computer in my house has a native ethernet port (really?), 2) the lengthy writeups I saw on connecting seemed to be w...

I'm glad it's worked well for you, Mark. And, I expressly stated that it was opinion, thereby leaving room for other opinions such as yours. And Volker's. There's nothing nebulous about my concerns and observations. I used DDUtil and VSPM for years. I had nothing but trouble with it even though the ...

Is there any latest Thetis updates for the 10E or any issues? None specific to the 10E, and no. What is the difference between the 10E and the Anan-100? I understand the 100 watts and the 14 bit verses 16 bit. Those are the main differences. Also, the 10E cannot be used for PureSignal linearization...

Just my opinion having used all three, major, virtual serial port app': First choice: Eltima VSPE. Most stable. Most flexible. Worth the $25USD. Second choice: com0com. Reasonably stable. Also quite flexible. Free. Third choice: VSPM. It works most of the time. When it decides not to work it'll have...

N1MM works with Thetis's virtual com ports. UCXLog also works with them. Very good, Thank you for info, i'm waiting my order, 7000 dle. Please if you know Where can I find instruction? How can we cat control to ucxlog? Kind regards, If you have questions about UCXLog setup, please post a new topic ...

va7qi wrote:I am guessing the single channel restriction has to do with the bandwidth over the network.

It's a software limitation. There is plenty of network bandwidth.

All, As of the date of this post, I have updated the name of this sub-forum to be more inclusive. This can now be the place to discuss and exchange ideas on all manner of control surfaces for Thetis and PowerSDR mRX. Control surfaces were, at one time, somewhat limited to MIDI controllers and variou...

I agree with Paul. The CAT command language provided with Thetis is extraordinarily rich compared to other radios. Macro buttons are the way to make the software all things to all people. Then folks only need to complain about missing CAT commands (or how to write macros ;) ). A macro button facilit...

E.g. 14.070 USB , all three are in sync. I click on something, say at 2500 on the waterfall and hit QSY which should bring it to 14.071 with that signall centered, in my case, on 1500. The frequency change gets overridden by the other apps. This is also true if I just try and tune via fldigi direct...

It sounds like somehow the setting for SWR Plotter have become corrupt. Your best bet is probably to uninstall it and reinstall it. Since this entire topic has nothing to do with Thetis, or macros, I'm moving it to the Digital Mode/Rig Control sub-forum. I'll eventually change it's title to "SW...

You have not provided enough information to render an intelligent answer. Is SWR Plotter no longer communicating with Thetis at all? Is it issuing commands and controlling Thetis but not getting data back? What's going on, exactly? You are going to need to provide more detail instead of just "M...

"Fight each other" is not specific enough to really understand what is going on. If you elaborate on this a bit perhaps some better answers might be forthcoming. One thing is for certain: when attaching multiple software app's to Thetis, either by serial CAT, TCP/IP CAT, or TCP/IP TCI, it'...

Similar to what I still see occasionally when operating split, albeit in-band. There's nothing "occasional" about this behavior. It is wholly and reliably 100% repeatable. It really made it a PITA to operate during the Armed Forces Day Crossband Test event yesterday. If fixing this fixes ...

Bug report... Erroneous behavior: S-ATT set to 31dB after each TX during split mode operations when receive frequency on VFO-A (RX) is outside of an amateur band and VFO-B (TX) is inside of an amateur radio band. Method of TX does not matter: PTT, MOX, VOX all produce the same results. Conditions t...