Richie, your code fix appears to have corrected all issues regarding RX2 out of band movement and memory selection. These are exciting times for OpenHPSDR thanks to you, Doug, this forum, and the Apache team. Looking forward to more magic!

7000DLE Thetis 2.6.8 (Richie fix)
73,
Jeff NJ2US

Thetis version 2.6.8 can be downloaded from
https://github.com/w5wc/Thetis/releases/tag/v2.6.8

Jeff NJ2US

Thanks to the team for delivering 2.6.8, it’s everything we’ve been waiting for. Only bug I’m finding is a problem when RX2 is active in conjunction with VFO SYNC. Can’t move frequency beyond an Amateur Band Edge. Hope this is a simple fix.
Jeff NJ2US

The S-ATT issue persists on RX2, in fact the 10-20-30 db steps don't seem to behave as expected either.

Also, 5 hours of continuous net control operations on 40 meters this morning, with no spectrum jumps on FW 2.0 (Orion MKII)

Jeff
NJ2US

First, thank you for everything you do in support of OpenHPSDR and the Apache equipment, I hang on your every post. My experience with Monitor appears to be very personal, and likely different from yours I expect. I find it very helpful, as it does seem to fairly represent my TX audio before it's co...

I don't have a 100D, 2.0 working very well at this point.


Jeff NJ2US
Thetis 2.6.7
7000DLE
Windows 10 Pro i7 3.6 Ghz 16gb RAM

Pre release 2.0 stable after 6 hours of operation so far, no panadapter noise floor rise. RX2 Step Attenuator continues to exhibit its anomaly as noted by Gary NC3Z.
Jeff NJ2US

I have found through extensive experimentation that solid resampling settings are elusive and remain a moving target. Settings I find to work great during one radio “session” only seem to fail the next time I fire up. I always listen to myself using the monitor function while wearing a headset, and ...

Thanks Rick, flashing now, I will report back.
Had the Full Scale floor jump occur twice this morning.
Jeff
NJ2US

This is happening more frequently, probably still a timing issue. 5 times in 3 weeks, in Thetis ver 2.6.6 and 2.6.7, P2 ver 1.9, either the RX 1 or RX 2 panadapter noise floor goes full scale. You hear floor noise, but its very evident that reception has stopped. It seems to occur as the transceiver...

I've noticed the "tinking" ring at higher filter lengths beyond 2048, but now they are very evident with 2.6.6 I am also hearing a ringing artifact on Side Band transmit monitor. I operate with headphones almost exclusively with Monitor "ON". Thought I was hearing things. I'll ex...

The capture I sent Rick contains both the Pre and post closure data, he received the file and will analyze it later today. I’m sure he would welcome other captures in the mean time. I fell back to 1.7 to run a net for an hour, and had no problem.

Jeff NJ2US

Rick,

I was able to wireshark capture the application close. However, I am not sure I have wireshark configured properly, I simply selected the interface, then clicked capture, then saved the result. I will email it to you.

Jeff NJ2US

Thetis 2.6.4, FW 1.8, 7000DLE
Same report. Several seconds into a PTT (transmitting), Thetis closed.

Jeff NJ2US

I think you only need the setup exe, it is a compressed archive that contains everything you need.

Link to Folder containing the Tmate2Console setup program:

https://1drv.ms/f/s!Aj054vb5k4NMhf9ugRYDimaa7ShEyw

Jeff NJ2US

Thanks for the explanation Rick, many of us did see that release note from Phil about the clock speed, and it was a head scratcher. The implication of that would seem to be a ding on the performance of later production Orion MKII boards, not being able to handle enhanced clock speeds. My guess is th...

7000DLE Serial # 00019 Thetis v2.6.3 (1/25/19) ADC1 and ADC2 both active My third attempt to run the Firmware P2 v 1.6 presently posted in the repo, resulted in similar behaviour that NC3Z saw. Upon activation of Pure Signal: SEQ->2 errors ADC2 Panadapter noise floor jumps to -80 Continuous audio gl...

Anan 7000DLE Ser Numb 000019
Thetis 2.6.3 1/20/19 version
P2 Firmware Version Non Pre-Lease 1.6 dated 1/21/1019

This release of the Firmware 1.6 dated 1/21/19 BREAKS RX 2 and BPF2.

I moved back to 1.6 Pre release.

Jeff NJ2US

These pre-releases are generally available at https://github.com/w5wc/Thetis/releases/ but it's important to keep in mind that they are not official, they don't always include the msi installer, and there is no warranty expressed or implied, and your mileage will probably vary.
Jeff NJ2US

P2 Firmware V 1.6 Pre-release
Thetis 2.6.3 (1/20/2019) beta
Anan 7000DLE Serial Number 00019
384K Sample Rate

Since 1.6 pre-release, no SEQ errors, No crashes, no anomalies, stable Pure Signal. Smoothest operation yet...

Jeff NJ2US

Thetis 2.6.2 P2 1.6, 7000DLE
2 days, very stable, no pure signal problems, no TX crashes. Only saw one seq error, but it was without consequence.
Amazing work Rick, thank you.

Jeff NJ2US

Scott, how do we know the difference?

Jeff NJ2US

7000DlE FW P2 1.5 Thetis 2.6.3 Windows 10 i7 32 GB RAM 160 meters, Both ADC active VFO’s sync’d. Saw a few SEQ 28 errors. At one point, RX2 audio was lagging RX1 audio, restarting Thetis corrected that. It seems that the Mic gain is reduced 5db when Audio look ahead or DEXP is enabled. Later in even...

Rick, Thanks for dropping the pre-release 1.5 firmware Loaded flawlessly and ran OK for about 30 minutes, at 192K, but twice this evening the Thetis 2.6.2 app simply stopped. Just as if somebody reached in and clicked the "X", went back to my Win 10 desktop. No error messages. Both times i...

FW 1.4, Thetis 2.6.2 Sample Rate 192K, A couple Pure Signal blow outs, but more importantly, Single Cal breaks Pure Signal on my setup. Every time. Must restart the application to fix. Sample Rate 384K, a couple SEQ errors, flash by too fast to see what they are, Quick Playback plays back, but when ...

Rob, Can you get the SWL spots to populate the Panadapter display? I imported Eibi database sked-b18.csv renamed to SWL.csv, Thetis reads it, I can search it, but nothing showing on Panadapter. DX spots appear just fine. Jeff NJ2US .....The DX Spotting and SWL Spotting functions are a very nice addi...

Loaded V1.4 late last night, but only tested for about 30 minutes, at all sample rates, very stable. More testing today. Only issue may have been Thetis related. With region set to US, made some out of band excursions using WWV, but when returning to amateur bands got a pop up for being “out of band...

Thanks for the clarification Gary, and I have seen your anomaly as well, where the "Correcting" bar remains. But when I saw that a few days ago, I didn't know about your "Tint" fix. I also wanted to clarify that when I see these issues , I have been running at the 192K sample rat...

Thetis V2.6.2 Oddly enough, I experienced the same problem as Gary. Operating 160 M this evening LSB, in the middle of a transmission, Pure Signal simply just drops off (stops). The Feedback and Correcting prompts disappear. Then, after a few seconds, they re-appear and PS resumes operation. Other t...